Wtb Wtt - Need A Seat Bottom In Good Shape.
#1
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Well, i COULD use the foam I suppose, but I need a drivers side seat bottom, the metal portion with the springs. Nothing broken, in good shape around the bolt holes that mount it in place.
Should be the same from either RD.
That part.
Shipping to 87114, will buy or trade for anything I've got left from my old FS threads.
Should be the same from either RD.
That part.
Shipping to 87114, will buy or trade for anything I've got left from my old FS threads.
#4
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Read brother, I don't need the full seat, just the seat BOTTOM. it unbolts with 4 bolts. out of the seat bottom, I only really need the metal base for it, it's small, and light.
Plenty of junkers, rarely any tibs anymore.
Plenty of junkers, rarely any tibs anymore.
#5
Super Moderator
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
JUST the pan the foam goes in, w/ springs? Not even the mounting rails to hold it to the car?
Yeah, that'd be way lighter than the whole seat. Check your PMs in a minute.
Yeah, that'd be way lighter than the whole seat. Check your PMs in a minute.
#7
Super Moderator
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
Does the foam just fall out, or is it all glued in there?
Let me know if you want the foam, as it will increase the shipping costs due to volume if I send it w/ foam.
Let me know if you want the foam, as it will increase the shipping costs due to volume if I send it w/ foam.