Wtb: Junk Clutch, Bad Clutch, Dont Throw It Away!
#1
I need a junk clutch. Something someone has laying around. Also need a pressure plate. Looking to pay for shipping and maybe a very little more. I know a few people have some shot ones around. Let me know. Looking to get it in the next week. Shipping should be 10 bucks via flat rate usps box. Thanks
#2
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: Sep 2008
Posts: 986
Likes: 0
From: Brampton Ontario
Vehicle: Two 97 RD Tibs and 2010 Genesis Coupe
I have a VHR performance pressure plate which was used for about 1000K and the clutch itself doesnt have much pad left on the 4 puck if you want it.Before i remvomed it from my car it was still grabbing without slipping...
Also comes with the release bearing in the pressure plate.Not sure on shipping might might be like $30-$40 from Canada
Let me know
Thanks
Also comes with the release bearing in the pressure plate.Not sure on shipping might might be like $30-$40 from Canada
Let me know
Thanks
#3
If I need to I will let you know. Would rather do it from the states though for time and cheapness. This can be a friction disc down to nothing. Or a rusted old pressure plate...
#7
Moderator
Joined: Feb 2009
Posts: 11,731
Likes: 5
From: Leesville, Louisiana
Vehicle: 2001 Hyundai Tiburon
I have a XTD 6 puc ceramic clutch. It's tough as hell. You'll want another pressure plate. I also have a seco clutch laying around. Both are in ok condition.
#8
Bump. Let me know what you guys have. Flat rate shipping should be like 10 or whatever. Need it asap to figure out my clutch conversion. everything will be posted also to do the conversion for a turbo dsm clutch!
#10
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: May 2002
Posts: 1,500
Likes: 0
From: Canada
Vehicle: x3 accent gk tiburon santa fe
i doubt shipping from here will be worth it
but wich dimensions do you need?
i've got a bunch of stuff already measured
but wich dimensions do you need?
i've got a bunch of stuff already measured