I need the following parts for a manual rd2, shipped to 33009 or willing to meet if close to south florida. I also have some other random parts to trade

. front and rear foam energy absorber
.evaporation canister
.non deployed air bag computer
.left side door interior door handle
.right side window regulator (the whole metal cable system, dont need the motor)
.distributor plastic cap
.headlight dust cap
.flip down lighter
.sunroof light switch
.left and right fog light
.cruise control vacum pump

 

I have a headlight dust cap, I don't know if it's going to fit yours or not though. RD1 or RD2? And which one?

Bidding on used RH window regulator - http://cgi.ebay.com/ebaymotors/97-Hyundai-...sQ5fAccessories

I may have my old evaporator canister somewhere - why in the world would you want that thing??

What is sunroof light switch, front and rear foam energy absorber, and flip down lighter ??

 

^ he stated it's an RD2. Did not specify high or low beam.

The light switch in the roof, next to the sunroof, I would assume is the "sunroof light switch"
the front and rear "foam energy absorbers" is the black foam behind the bumpers that absorbs energy (impact) in an accident
flip down lighter - I'm assuming the cigarette lighter tray that flips open when you press it?

 

Hmm, I don't have a switch there (which I always thought was annoying, since there is no way to turn the dome lights off if either of the doors are open) ... Don't wanna hijack but does anyone know if I got that switch if it would be plug n play, or would I have to do a bunch of wiring?

Are any of the headlight dust caps between RD1 and RD2 the same?

I have an extra ashtray/lighter dash assembly piece, do you want specifically the LIGHTER part that pushes into the lighter so that you can light cigs, or do you want the dash piece that flips?

 

Dome Light switches next to sunroof switch:



The Center button that's pressed in is to have the lights come on when the door is ajar. The button on each side of that turns the individual light on. Again, this is an RD2... don't think they had it in '97 Tibs. I doubt it's plug and play... I don't think they wired it in the '97s. It's also a pretty bulky piece that includes the sunglasses holder.

 

it will be for a rd2 low beam dust cap for the headlight

my evaporator canister is spilling pellets and causing my evap system to clog and allowing gases to flow thru

front and rear energy absorber are the foam pieces that are between the bumper and the hard plastic support

as far as the light switch is the one picture below

 

so do you need the entire surround piece and all buttons, or just one of the buttons, or all 3 light buttons??

 

i have a dust cap if u want it pm me to let me know if ur interested.

 

fog lights
price?

 

i have both fog lamps for sell..pm me