Some Random Tibby Parts
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: South Dakota
Posts: 786
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000/Hyundai/Tiburon
Since my dad now owns the tibby, he's going to put some money into fixing the parts up.
I need a front wiper motor (i think redz picked one up so i'm not sure if i need it yet, but i will talk to him)
I'm not sure on this but the wheel bearing is going out and my crazy auto teacher says i have to get a new hub to fix it, I just haven't had the time to check it out yet, so possibly a drivers front hub with good wheel bearings.
I'll keep this updated here when i remember what all else i need.
Shipping to 57006
I need a front wiper motor (i think redz picked one up so i'm not sure if i need it yet, but i will talk to him)
I'm not sure on this but the wheel bearing is going out and my crazy auto teacher says i have to get a new hub to fix it, I just haven't had the time to check it out yet, so possibly a drivers front hub with good wheel bearings.
I'll keep this updated here when i remember what all else i need.
Shipping to 57006
#3
Senior Member
Join Date: Mar 2006
Posts: 7,799
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Just get a bearing and learn to press it. Beats getting a new hub. The fronts you can press in and out. Never had to do a rear yet but I think you replace the rear assembly
#4
Senior Member
Join Date: Jan 2008
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Tiburon
That's right, the fronts the bearing is pressed in, the rears, you replace the hub assembly. Our bearings are notorious for going bad, don't buy OEM replacements, pick it up from NAPA or something.
#6
Senior Member
Thread Starter
Join Date: Sep 2008
Location: South Dakota
Posts: 786
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000/Hyundai/Tiburon
Well we have a press in our auto shop, but my crazy shop teacher insists that I need a new hub and to just replace it.
TC how much for it shipped to 57006 in US currency if you could. Thanks
Bigfish, it just a loud not really grinding noise, but kind of sounds like your tires a rubbing.
TC how much for it shipped to 57006 in US currency if you could. Thanks
Bigfish, it just a loud not really grinding noise, but kind of sounds like your tires a rubbing.
#7
Senior Member
Join Date: Oct 2008
Location: Warren,OH,44483
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I have replaced all four bearings. The rear is the whole assembly. The fronts are just a bearing costs like twenty something at advaced auto parts you just need to press the old one out and the new one in. I cannot see any reason you need a new hub assembly for the front. Yes that grinding/rubbing noise is most likley a bearing and another way to check is jack up the car and place a hand on top of the tire one on the bottom and rock it back and fourth it shouldnt move unless your bearing is bad.
#10
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
I've still got that motor, send me an offer and I'll send it out. It's doing me no good.