Some Random Tibby Parts
#1
Thread Starter
Senior Member
Joined: Sep 2008
Posts: 786
Likes: 0
From: South Dakota
Vehicle: 2000/Hyundai/Tiburon
Since my dad now owns the tibby, he's going to put some money into fixing the parts up.
I need a front wiper motor (i think redz picked one up so i'm not sure if i need it yet, but i will talk to him)
I'm not sure on this but the wheel bearing is going out and my crazy auto teacher says i have to get a new hub to fix it, I just haven't had the time to check it out yet, so possibly a drivers front hub with good wheel bearings.
I'll keep this updated here when i remember what all else i need.
Shipping to 57006
I need a front wiper motor (i think redz picked one up so i'm not sure if i need it yet, but i will talk to him)
I'm not sure on this but the wheel bearing is going out and my crazy auto teacher says i have to get a new hub to fix it, I just haven't had the time to check it out yet, so possibly a drivers front hub with good wheel bearings.
I'll keep this updated here when i remember what all else i need.
Shipping to 57006
#4
That's right, the fronts the bearing is pressed in, the rears, you replace the hub assembly. Our bearings are notorious for going bad, don't buy OEM replacements, pick it up from NAPA or something.
#6
Thread Starter
Senior Member
Joined: Sep 2008
Posts: 786
Likes: 0
From: South Dakota
Vehicle: 2000/Hyundai/Tiburon
Well we have a press in our auto shop, but my crazy shop teacher insists that I need a new hub and to just replace it.
TC how much for it shipped to 57006 in US currency if you could. Thanks
Bigfish, it just a loud not really grinding noise, but kind of sounds like your tires a rubbing.
TC how much for it shipped to 57006 in US currency if you could. Thanks
Bigfish, it just a loud not really grinding noise, but kind of sounds like your tires a rubbing.
#7
I have replaced all four bearings. The rear is the whole assembly. The fronts are just a bearing costs like twenty something at advaced auto parts you just need to press the old one out and the new one in. I cannot see any reason you need a new hub assembly for the front. Yes that grinding/rubbing noise is most likley a bearing and another way to check is jack up the car and place a hand on top of the tire one on the bottom and rock it back and fourth it shouldnt move unless your bearing is bad.