turbo set up with extra injectors
02-24-2005, 12:32 AM
#22
http://www.hyundaiaftermarket.org/images/vendor1.png
Thread Starter
Join Date: May 2002
Location: Canada
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: x3 accent gk tiburon santa fe
Casper,
Both ends of the fuel rail is treaded,so you could configure it the way you want.
You're right,in the pics there's a pipe plug on one end
Both ends of the fuel rail is treaded,so you could configure it the way you want.
You're right,in the pics there's a pipe plug on one end
02-24-2005, 08:49 PM
#24
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
One more question. Can we get someone with an airram installed to see if this will fit?
02-24-2005, 09:42 PM
#25
http://www.hyundaiaftermarket.org/images/vendor1.png
Thread Starter
Join Date: May 2002
Location: Canada
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: x3 accent gk tiburon santa fe
Redz,
i have the air ram on my car right now ;-)
so for i confirmed the fit with the beta1 & 2 intakes and heads
just need to confirm with the air ram but 99.5% sure it fit quite well
i have the air ram on my car right now ;-)
so for i confirmed the fit with the beta1 & 2 intakes and heads
just need to confirm with the air ram but 99.5% sure it fit quite well
02-25-2005, 10:05 AM
#27
http://www.hyundaiaftermarket.org/images/vendor1.png
Thread Starter
Join Date: May 2002
Location: Canada
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: x3 accent gk tiburon santa fe
sorry i taught i replied to this 02.gif
you mean add nozzles wit the already injectors?
or only use the spacer for the nitrous?
i both case i'm almost sure it can be done,i'll have to confirm with a nozzle to see if we could put them on the underside
you mean add nozzles wit the already injectors?
or only use the spacer for the nitrous?
i both case i'm almost sure it can be done,i'll have to confirm with a nozzle to see if we could put them on the underside
02-26-2005, 08:05 AM
#29
Senior Member
Join Date: May 2001
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
QUOTE
or only use the spacer for the nitrous?
Yep exactly.
QUOTE
Hmmm I wonder if the spacer for the injectors could be made out of the same material that is used for phenolic spacers??wink1.gif
Ditto
02-27-2005, 10:55 AM
#30
http://www.hyundaiaftermarket.org/images/vendor1.png
Thread Starter
Join Date: May 2002
Location: Canada
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: x3 accent gk tiburon santa fe
techcontib, i,ve rechecked,
we could make the spacer a bit different on the bottom side so all the
surfaces are "flat" not angled,we could machine in new holes+ pockets to screw in the nozzle in there
for the phenolic quetion, the first tough was to use this, but,
it wouldn't give a good seal for the injector o ring's du to the laminated composition of the real phenolic stuff
also, it wouldn't have made a "resistant" enough material to screw in the fuel rail mounting lugs
i'd hate it if my fuel rail would pop out of its hole 02.gif
we could make the spacer a bit different on the bottom side so all the
surfaces are "flat" not angled,we could machine in new holes+ pockets to screw in the nozzle in there
for the phenolic quetion, the first tough was to use this, but,
it wouldn't give a good seal for the injector o ring's du to the laminated composition of the real phenolic stuff
also, it wouldn't have made a "resistant" enough material to screw in the fuel rail mounting lugs
i'd hate it if my fuel rail would pop out of its hole 02.gif