http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...=ADME:B:LC:MT:1

 

If you would ship to canada i would buy them ... i call dibs if he will ..

 

got any pics with the halos on?

 

I placed the night photo from the auction where I bought these gauges in my gallery. I figured seeing the guy never responded to my emails that I would just borrow one of his pics so you guys could see them, I am not very picture savvy when it comes to message boards.

 

so you say these fit the 00-02 models.... hmm..

 

I said 00-01 unsure about 02, but I can gurantee it does not fit 99.

 

its cause there is no 02 model. wink.gif

 

my bad... hit wrong button... im an idiot.

they look tight... how bad would installation be? tibby01?

 

The hardest part for me was taking apart the dash, but once you get to the instrument cluster its a piece of cake. Just take the cluster apart slide the gauges over the needles, just be very careful while you are doing this. Might have to use glue to keep gauges in place. You then run the wires out of the cluster and close her back up and replace into the dash making sure you have access to those wires. Then plug the ground and 12v wire into the fuse panel. These things do come wth instructions and its pretty self explanitory when you see them.

 

he pretty much said it all. i would use some thin double stick tape though(like the double sided scotch tape) to hold the new faces down though, not glue. i would also wire it right into the dimmer switch, its much closer. power to green/white wire coming off the dimmer switch, ground to black wire.