Fs: Motegi Mr3's Super Silver 18's W/ok Tires
#1
Thread Starter
Senior Member
Joined: May 2006
Posts: 1,494
Likes: 0
Vehicle: 1998/Hyundai/Tiburon FX
Hello,
I have had these sitting around my house for about a year or so, lol.
Always wanted to post up a for sale thread on the forum because whenever I try to sell them in the newspaper I get a ton of honda idiots that don't understand why the 4x100 bolt pattern is no longer safe to use.
Anyway, here is the story. After using the junky wheel spacers that Pep-blows installed on the car when they put on the rims (due to my captive rotor setup), a lug stud eventually broke off and I determined it was due to the limited lug nut engagement etc.
So, what I did was burred out the holes (the 100x4 bolt pattern) on the hub side of the wheel so they now go over the bolts for the captive rotors. I have done this to all 4 wheels, they are sort of meant for a tiburon now, lol. No spacers are needed (if you have a captive tib).
Like the title says they are 18x7's with khumo exsta supra 712's (215/35/18). Two of the tires have about 3/16 to 1/4 inch of tread on them, and the other two are bald on the outside due to a toe problem I had after I installed my ksport coilovers (should have done the alignment sooner).
Also, two of the wheels have some curb rash that I sort of cleaned up with a dremel and some touch up paint. Damn near no road noise though, much less than stock, and balanced fine, no wheel shimmy or anything. Used sticky weights to balance them on the outside so there are no weights visible.
Down to the price, I am asking 300 firm for all 4 wheels, lug nuts with key, and tires. I wish I could post up pics, but never learned how, lol and dont feel like opening an account to do so.
I would say local pick up only so if you live near elkton, md. Give me a PM and I will shoot you some more info.
I know it is kind of pointless without pics but figured I would give it a shot, could really use the extra money right now.
I have had these sitting around my house for about a year or so, lol.
Always wanted to post up a for sale thread on the forum because whenever I try to sell them in the newspaper I get a ton of honda idiots that don't understand why the 4x100 bolt pattern is no longer safe to use.
Anyway, here is the story. After using the junky wheel spacers that Pep-blows installed on the car when they put on the rims (due to my captive rotor setup), a lug stud eventually broke off and I determined it was due to the limited lug nut engagement etc.
So, what I did was burred out the holes (the 100x4 bolt pattern) on the hub side of the wheel so they now go over the bolts for the captive rotors. I have done this to all 4 wheels, they are sort of meant for a tiburon now, lol. No spacers are needed (if you have a captive tib).
Like the title says they are 18x7's with khumo exsta supra 712's (215/35/18). Two of the tires have about 3/16 to 1/4 inch of tread on them, and the other two are bald on the outside due to a toe problem I had after I installed my ksport coilovers (should have done the alignment sooner).
Also, two of the wheels have some curb rash that I sort of cleaned up with a dremel and some touch up paint. Damn near no road noise though, much less than stock, and balanced fine, no wheel shimmy or anything. Used sticky weights to balance them on the outside so there are no weights visible.
Down to the price, I am asking 300 firm for all 4 wheels, lug nuts with key, and tires. I wish I could post up pics, but never learned how, lol and dont feel like opening an account to do so.
I would say local pick up only so if you live near elkton, md. Give me a PM and I will shoot you some more info.
I know it is kind of pointless without pics but figured I would give it a shot, could really use the extra money right now.
#2
#4
Senior Member
Joined: Dec 2005
Posts: 458
Likes: 0
From: York. About 2hrs from Philly and 4 hours from Pittsburgh
I live fairly close to you. I'm workin on installing a turbo kit right now, but I can contact you after everything is done (hopefully I'll get everything in the mail and installed in 2-3 weeks.) If I have money left after tuning I'd be interested.