FS: L.s.d
#1
Thread Starter
Member
Joined: Mar 2002
Posts: 71
Likes: 0
From: Santa Clarita
Vehicle: 2010 Honda VFR1200
I have many old Items left over from when I had a RD 2001 Tib.
I have a engine pull with low miles i think less than K30 if I could find the info on it. its a 99 2.0 if memory serves me correct. Has injectors intake manny. Throttle body I. Don't remember about exhaust. Will be posting pictures later. Looking for local pick up.
Can deliver up to 400miles if cost of gas is paid plus 50 bucks.
Price $500
Fidanza Alum Flywheel. More than likely the later 1999-2003 flywheel.
Daikin Clutch. Both new in box.
$350 firm for both clutch and flywheel. pretty sure I'm loosing money on this as I remember $350 for the flywheel alone.
Staying with the clutch/trans area. I have a Kaaz 1.5way LSD Also new. would like $800 Firm. You will need to get a Mits Speedo Gear. Research if you do not know what it is. Paid 1k
Two custom speaker boxes should fit 2000-2001 Rear trunk area. Left Side Right side. Sealed and 10 inch opening. Look ok need to be finnished. 70 for both.
Airram is sold
Flickr Link Below.
http://www.flickr.com/photos/bryce_g...7633481785523/
Will add image of Kaaz LSD When I can get to items.
Again local pick up prefer Will ship buyer pays All shipping. Plus the paypal%'s.
If you want it all I will package deal all of it for $2K
Reason for sale of items I had hoped to getting around to buying another one. Life got in the way.
Would Consider Trading for up to date Sony Lens, Camera, or Video Cam Flash equipment.Must be removable Lens. High end no garbage trades.
Trades Must be local.
I Edited Post. Found my old post when I was trying to sell these 8 years ago.
I have a engine pull with low miles i think less than K30 if I could find the info on it. its a 99 2.0 if memory serves me correct. Has injectors intake manny. Throttle body I. Don't remember about exhaust. Will be posting pictures later. Looking for local pick up.
Can deliver up to 400miles if cost of gas is paid plus 50 bucks.
Price $500
Fidanza Alum Flywheel. More than likely the later 1999-2003 flywheel.
Daikin Clutch. Both new in box.
$350 firm for both clutch and flywheel. pretty sure I'm loosing money on this as I remember $350 for the flywheel alone.
Staying with the clutch/trans area. I have a Kaaz 1.5way LSD Also new. would like $800 Firm. You will need to get a Mits Speedo Gear. Research if you do not know what it is. Paid 1k
Two custom speaker boxes should fit 2000-2001 Rear trunk area. Left Side Right side. Sealed and 10 inch opening. Look ok need to be finnished. 70 for both.
Flickr Link Below.
http://www.flickr.com/photos/bryce_g...7633481785523/
Will add image of Kaaz LSD When I can get to items.
Again local pick up prefer Will ship buyer pays All shipping. Plus the paypal%'s.
Reason for sale of items I had hoped to getting around to buying another one. Life got in the way.
Would Consider Trading for up to date Sony Lens, Camera, or Video Cam Flash equipment.Must be removable Lens. High end no garbage trades.
Trades Must be local.
I Edited Post. Found my old post when I was trying to sell these 8 years ago.
#5
Thread Starter
Member
Joined: Mar 2002
Posts: 71
Likes: 0
From: Santa Clarita
Vehicle: 2010 Honda VFR1200
Some people are under the impression that I still have my car. This is not the case the insurance company took it... The extra engine was going to be my project turbo engine. So I hope that clears some things up...
Oh one other note Right now Dibs are out on the L.S.D so you better go get some shrooms or something..
Oh one other note Right now Dibs are out on the L.S.D so you better go get some shrooms or something..
#8
Thread Starter
Member
Joined: Mar 2002
Posts: 71
Likes: 0
From: Santa Clarita
Vehicle: 2010 Honda VFR1200
Yes Fontana Is Do able engine 100 bucks delivery 20 bucks gas??? hmm truck gets about 15 miles to the gallon and your about 80 miles one way so 160 by 15 should be about 11-12 Gallons gas is about 2.75 so 33 bucks high side so round off 150 plus a big gulp 151.37 Cash baby.. just kidding about the big gulp unless you want to cover it ?? One note Do you have a cherry picker at your house or am i just kicking it off the back of my truck ?.
Dibs on the battery box is taken right now pending price approval.
Dibs on the battery box is taken right now pending price approval.
#9
The airram will work for a beta1 correct? If so, I am very interested. How could I pay for it?
Nevermind, decided to go with the stock IM and just bore it as close to 61mm as I can with the rside TB for now.
Sorry, but thanks anyways. cool.gif
Nevermind, decided to go with the stock IM and just bore it as close to 61mm as I can with the rside TB for now.
Sorry, but thanks anyways. cool.gif
#10
Changed my mind, let me know how much shipping will be to 21921, and I will definately take it off your hands. Just to clarify, this is brand new and will fit on the beta1 engine correct? I have a 1.8L, but the heads are the same for both engines, so I will make it work. I will use the rside 61mm TB with it and should see some decent gains. How long until you recieve it? Thanks again. smile.gif