Fs: Aftermarket Parts + Seats
01-31-2009 | 04:16 PM
#12
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
I'll pm you guys shipping quotes on Monday.
likeyoumeanit has dibs on the headers, lilo has second.
oddwayne has dibs on the shifter, kcr has second.
I'm going to sell the ARK muffler and resonator to Dimonhead, since he wants them both as a package deal.
Nobody's interested in the BBTB or the Magnaflow? I thought those would be the first 2 items gone! Ha
likeyoumeanit has dibs on the headers, lilo has second.
oddwayne has dibs on the shifter, kcr has second.
I'm going to sell the ARK muffler and resonator to Dimonhead, since he wants them both as a package deal.
Nobody's interested in the BBTB or the Magnaflow? I thought those would be the first 2 items gone! Ha
01-31-2009 | 06:12 PM
#13
Senior Member
Joined: Oct 2008
Posts: 605
Likes: 0
From: Canada
Vehicle: 2004 Tuscani Tiburon
the BBTB is too expensive is probably why. I know you have modified it a bit but you can still get a SR BBTB for $250 shipped. And Dentist I believe will make you a great quality 58mm TB for $150. which is all you need really unless your running a big turbo.
02-01-2009 | 09:17 AM
#14
Senior Member
Joined: Dec 2008
Posts: 195
Likes: 0
Vehicle: 2001 Hyundai Tiburon SE
<div class='quotetop'>QUOTE (zoned019 @ Jan 29 2009, 12:10 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Adding an item.....
Magnaflow 3 Chamber Muffler (quieter) - $40
I had this on my car for about a week. It was much quieter than the standard rice can, but I still wanted it to be a bit quieter, so I bought a different muffler and a larger resonator. Sounds good, slightly restrictive, yet quiet. 24" long. You'll have to weld on your own tip. Comes with a hanger welded already to fit a tib.
</div>
Give me some more info on this muffler.
Is it stainless?
What piping inlet?
Will it fit a RD2?
Magnaflow 3 Chamber Muffler (quieter) - $40
I had this on my car for about a week. It was much quieter than the standard rice can, but I still wanted it to be a bit quieter, so I bought a different muffler and a larger resonator. Sounds good, slightly restrictive, yet quiet. 24" long. You'll have to weld on your own tip. Comes with a hanger welded already to fit a tib.
</div>Give me some more info on this muffler.
Is it stainless?
What piping inlet?
Will it fit a RD2?
02-01-2009 | 11:31 AM
#15
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
Honestly I can't remember, and maganflow doesn't state on their site. It could be satin stainless.. I had it on my car for a week, and it's been sitting in my closet for a year.
It's a magnaflow 3 chamber muffler.
2.5" inlet/outlet
14" body
offset/center
part #13216
This should be perfect for any aftermarket exhaust setup, you'll have to get your own tip welded on, and it has already been cut because the muffler body fits just perfect if you have an over axel exhaust system, the muffler has to be angled slightly, and the pipe welded to it. It sounds much better than a straight through muffler in my opinion, but I wanted my exhaust super quiet, so I got an even more restrictive S tube muffler.
Magnaflow has some really cool exhaust tips, as well as drgas.com.
<div class='quotetop'>QUOTE </div><div class='quotemain'>MagnaFlow XL 3 Chamber Mufflers use a unique combination of large diameter perforated tubing and strategically placed sound baffles to reduce unwanted resonance and help your engine create horsepower. The sound baffles tune the sound waves using calibrated tuning gate openings that allow portions of the waves to pass through. These tuned waves reflect off the back wall of the muffler and cancel out unwanted harsher sounds. The large diameter perforated core eliminates the flow restrictions of a louvered style core. A careful balance between perforation size/spacing and the baffle tuning gate make for a great 3 chamber performance muffler.</div>
After more looking I found you can get these mufflers new for like $45-50 (+shipping), so I'll make it $40 shipped. Keep in mind this already has been cut and has the hanger welded on, and it was only used for a week.
It's a magnaflow 3 chamber muffler.
2.5" inlet/outlet
14" body
offset/center
part #13216
This should be perfect for any aftermarket exhaust setup, you'll have to get your own tip welded on, and it has already been cut because the muffler body fits just perfect if you have an over axel exhaust system, the muffler has to be angled slightly, and the pipe welded to it. It sounds much better than a straight through muffler in my opinion, but I wanted my exhaust super quiet, so I got an even more restrictive S tube muffler.
Magnaflow has some really cool exhaust tips, as well as drgas.com.
<div class='quotetop'>QUOTE </div><div class='quotemain'>MagnaFlow XL 3 Chamber Mufflers use a unique combination of large diameter perforated tubing and strategically placed sound baffles to reduce unwanted resonance and help your engine create horsepower. The sound baffles tune the sound waves using calibrated tuning gate openings that allow portions of the waves to pass through. These tuned waves reflect off the back wall of the muffler and cancel out unwanted harsher sounds. The large diameter perforated core eliminates the flow restrictions of a louvered style core. A careful balance between perforation size/spacing and the baffle tuning gate make for a great 3 chamber performance muffler.</div>
After more looking I found you can get these mufflers new for like $45-50 (+shipping), so I'll make it $40 shipped. Keep in mind this already has been cut and has the hanger welded on, and it was only used for a week.
02-03-2009 | 03:46 PM
#16
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
Dimonhead, likeyoumeanit, oddwayne:
I PM'ed all you guys yesterday, none of you responded. If you don't respond to me within 24 hours of now I'm going to sell the items to the next person who has dibs.
On the topic of the BBTB.. Keep in mind that this is an RSide, it is chromed, it is adjustable, cost $350 new I think, I have already modified it so the butterfly won't stick, AND it is cruise compatible (which is an extra $35 pulley from SFR).
Considering all that, I think it's a fair deal. If it doesn't sell, I guess I'll lower the price down, really not in that big of a rush to get rid of it though. It's pretty.
I PM'ed all you guys yesterday, none of you responded. If you don't respond to me within 24 hours of now I'm going to sell the items to the next person who has dibs.
On the topic of the BBTB.. Keep in mind that this is an RSide, it is chromed, it is adjustable, cost $350 new I think, I have already modified it so the butterfly won't stick, AND it is cruise compatible (which is an extra $35 pulley from SFR).
Considering all that, I think it's a fair deal. If it doesn't sell, I guess I'll lower the price down, really not in that big of a rush to get rid of it though. It's pretty.
02-10-2009 | 03:27 PM
#20
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 5,155
Likes: 0
From: Eau Claire, WI
Vehicle: 97 Tib
Update..
Everything is still available except both the mufflers and the headers have been sold.
Dimonhead had dibs on the ARK resonator, but since he has not gotten back to me, I will give those to tib_500.
People are really slow at responding to PM's and being unreliable when they want something, so for the rest of the items I'm going to say you must complete payment within 24 hours of dibs.
tib_500, I sent you a PM.
lilo, the headers are gone, interested in anything else?
Thanks!
Everything is still available except both the mufflers and the headers have been sold.
Dimonhead had dibs on the ARK resonator, but since he has not gotten back to me, I will give those to tib_500.
People are really slow at responding to PM's and being unreliable when they want something, so for the rest of the items I'm going to say you must complete payment within 24 hours of dibs.
tib_500, I sent you a PM.
lilo, the headers are gone, interested in anything else?
Thanks!