All prices are OBO and do not include shipping.

B&M Short Shifter - $40
I really liked this shifter. Easy to install, comes with knob


OBX Headers - $70
I used these headers for about a year and a half. Flex pipe is still in good condition and has no tears. These are 120 shipped on ebay, I don't think it should be anywhere near 50 to ship.


RSide Adjustable 59-61mm BBTB (with working cruise puley) - $250
This throttle body has been modified quite a bit by me. When I got it, the idle stop/adjuster screw was broken in shipping, so it would only idle because, as anyone who has had an aftermarket bbtb before knows, the butterfly "sticks" when the throttle is fully closed. So, I pounded a nail in and ground the spot in the pulley down for it to stop on. Also, this is a "twin throttle" pulley, however, the holes drilled in it are not the right size for the US spec throttle cable (KDM is different). So, I redrilled a new hole so that the cruise cable will fit.





Brand new ARK muffler (with silencer) - $35
Got this muffler with my ARK exhaust, never been installed. Comes welded with a hanger so it will bolt up and hang perfectly. Full stainless steel. The incoming pipe is 2.5", the muffler tip is 4.5". Should produce a nice really deep throaty sound, I didn't want to use it because I thought it would be too loud for what I wanted. There is an included silencer though, if you want to keep it quiet, I've read that these actually do work really well. With the silencer in, the outgoing pipe is 2.5". ARK is a very reputable Korean company producing exhausts.


Brand new ARK resonator - $25
I used a longer resonator in my exhaust setup. Full stainless steel. Pipe is 2.5" throughout. 22" long, flanged on one end with a 2 bolt, about 3" of pipe and an included matching flange is installed and bolted to it.


180 Degree Mandrel Bent pipe - $10
Mild steel, 2.5" pipe, can be used for any custom setup. I thought I was going to need it, just never ended up using it.


Exhaust reducer (smoother flow) - $5
Mild steel reducer/expander 2.5" -> 2.25".


RD1 FX Tiburon cloth seats (front+rear) - $125
No pics of these, there is a small tear on the driver's seat, front seats are in good condition showing average wear, rears show hardly any wear. I have a leather set I bought laugh.gif

 

dibs on the headers shipping quote to 17602 please

 

Adding an item.....

Magnaflow 3 Chamber Muffler (quieter) - $40
I had this on my car for about a week. It was much quieter than the standard rice can, but I still wanted it to be a bit quieter, so I bought a different muffler and a larger resonator. Sounds good, slightly restrictive, yet quiet. 24" long. You'll have to weld on your own tip. Comes with a hanger welded already to fit a tib.

 

man, you beat me to the headers. Dibs on the possilbe dibs on the ark muffler.

 

zoned you have been pmed for shifter

 

Do any of the mufflers fit the RD2 or do I have to remove the welded in hanger?

 

I tried sending you a PM but your inbox is full. I call second dibs on the shifter and can paypal you anytime if oddwayne changes his mind.

 

dibs on ark muffler and ark resonator , pending shipping price to 19067
thanks

 

<div class='quotetop'>QUOTE (GFTiburon @ Jan 30 2009, 06:38 PM) <{POST_SNAPBACK}></div><div class='quotemain'>Do any of the mufflers fit the RD2 or do I have to remove the welded in hanger?</div>

theres welding involved

 

<div class='quotetop'>QUOTE (DimonHead @ Jan 31 2009, 02:25 AM) <{POST_SNAPBACK}></div><div class='quotemain'>dibs on ark muffler and ark resonator , pending shipping price to 19067
thanks</div>


<div class='quotetop'>QUOTE (mwood @ Jan 31 2009, 09:19 AM) <{POST_SNAPBACK}></div><div class='quotemain'>theres welding involved</div>

Hey mwood

What's the Tibs stock piping size 2.25"?