Frozen's Part Out Thread
08-10-2010 | 09:26 PM
#1
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 741
Likes: 0
Vehicle: 2001 Tiburon
Frozen's Part Out Thread
I'm building a garage and trying to buy a Porsche so I'm liquidating the tib! I've had a lot of heartache and headaches over scrapping my turbo project, but alas I'm just not motivated to continue on, it breaks my heart to do so but I'm returning the car to stock and selling it (hopefully to my girlfriend so I'll still get to drive it/maintain it once in a while)... Anyways, most of these parts have been installed on the car, but never used. Others have never been installed period. Others I purchased used. Everything is being sold as is.
If you have any questions feel free to ask or PM me. SHIPPING IS EXTRA ON EVERYTHING. I'm from Canada and I'm willing to eat a bit of the shipping due to cross border sales on a case by case basis. If you buy 2 or more items I MAY be willing to give discounts, depending on the item. Please PM me for any inquiries. If you think a price is too high, PM me and maybe we can work something out.
Master list of items for sale;
ARP Head and Main stud kit
Prosport Electronic Oil Pressure Gauge - <u>SOLD</u>
Prosport Electronic Boost Gauge
Prosport EGT Gauge
Compact Divisions Triple Gauge Pods x2 (see thread)
Ross 82mm Low Comp Pistons/Totalseal Rings
Turbo Kit
Vibrant 3" Exhaust
Alpine MRD-M605 Mono Bass Amp
Sony XM-444 Amp
Speedhut EL Gauge Faces KM/H
ARK Short Shifter
Custom Sub Box (Wheel well)
Rear Strut Bar - <u>SOLD</u>
Floor Bar - <u>SOLD</u>
Factory Tuned Front Strut Bar
Custom Made Connecting Rods
NGK AFX Wideband
Greddy Turbo Timer - <u>SOLD</u>
MOMO Steering Wheel w/ System Upgrade hub adapter
Sparco Racing Seats - local sale pending
Aeromotive FPR w/ Gauge - dibs turboron
Walbro 255lph Fuel Pump
Oil Catch Can
Vacuum Manifold
Electronic Boost Solenoid
RD2 Double Din Surround
VHR Clutch Kit w/ Lightweight Flywheel
OBX Adjustable Cam Gear
440cc Injectors Green Tops
************************************************** *********
ARP Head and Main stud kit
This kit is brand new in the box, purchased from Atomic Speedware. Boxes are still sealed from Atomic. Paid $255, asking $235.
<strike>Prosport Oil Pressure</strike>, EGT, and Boost gauges, as well as Compact Divisions triple gauge pod.
These gauges are all brand new, but were installed in the car. The Oil pressure gauge/sender unit has seen about 5 minutes of use. The EGT has had no use (the gauge was installed but the sender was never installed in the turbo manifold). The Boost gauge (electrical, not mechanical) was installed, and had about 5 minutes of use along with the oil pressure gauge. Note that there is a small dent in the bezel on this gauge, shown in the pics. You can turn the bezel any way you want, so this isn't really noticable when it's installed. They are all the Blue/White Performance Series and are all in mint condition (minus the dent in boost gauge). They go for $43, $94, and $56 respectively on the Prosport site. Selling for $35, $80, and $45, or $160 if you take all 3. If you take all three I'll leave the harnesses attached the way they are so installation is easier for you. I also have the compact divisions fiberglass triple gauge pod shown in the pics. Good fitment, just takes 1 screw and some two sided tape. Paid $130, asking $100, painted black. I also have a second unit, the exact same thing in black primer, but the last 8-10 inches is broken off the top. I have the other piece, you can try and fix it or just use it as is, I'd like $40 for it.
Ross low-comp 82mm Forged Pistons.
These are brand new in the box. Also included are a brand new set of TotalSeal piston rings. The pistons include wrist pins and locking clips. I started gapping one of the rings, but I never got down to the actual size needed. This changes nothing, you will have to gap your piston rings on installation, I'm just being up
front. Asking $500 for this complete set. I paid $600 from a member on RDT, and brand new the pistons alone go for $700+. The ring set sells for over $100.
Complete turbo kit including turbo, manifold, w/g and dump tube, bov, FMIC, piping, DP, oil lines and oil pan. $1350
3" SS Vibrant exhaust, all v-band clamps, $800 or $2000 total with the turbo kit.
Alpine MRD-M605 mono amp $175
This amp was in my car for about 8 months. It is in great condition, the only defects are a very light mark underneath the stainless cover (shown), and I lost one of the allen head screws (shown). This is a great amp.
Sony 444 Amp $50
This is no alpine, but if you're looking for something to run your 40-50 watt speakers, this gets the job done. It's a 4 channel amp. I think I bought it from Australia or something, I couldn't seem to find much info on it. $50 and it's yours.
SpeedHut EL gauge faces KM/H $60
These are black speedhut gauge faces, in KM/H. The pics show it all. Brand new with inverters, installed but never used. The base price on these is $80 from speedhut, I'll take $60. Pic is blurry but you can see them lit up. Goes great with DTN's LED needle mod (shown).
ARK Short Shifter $200
Custom wheel well fibreglass sub box $200
This is a sub box I made. I put roughly 50 hours and $120 worth of material into this. Selling for $200. Add $100 and I'll throw in the 12" Alpine Type R sub that it was designed for!
If you have any questions feel free to ask or PM me. SHIPPING IS EXTRA ON EVERYTHING. I'm from Canada and I'm willing to eat a bit of the shipping due to cross border sales on a case by case basis. If you buy 2 or more items I MAY be willing to give discounts, depending on the item. Please PM me for any inquiries. If you think a price is too high, PM me and maybe we can work something out.
Master list of items for sale;
ARP Head and Main stud kit
Prosport Electronic Oil Pressure Gauge - <u>SOLD</u>
Prosport Electronic Boost Gauge
Prosport EGT Gauge
Compact Divisions Triple Gauge Pods x2 (see thread)
Ross 82mm Low Comp Pistons/Totalseal Rings
Turbo Kit
Vibrant 3" Exhaust
Alpine MRD-M605 Mono Bass Amp
Sony XM-444 Amp
Speedhut EL Gauge Faces KM/H
ARK Short Shifter
Custom Sub Box (Wheel well)
Rear Strut Bar - <u>SOLD</u>
Floor Bar - <u>SOLD</u>
Factory Tuned Front Strut Bar
Custom Made Connecting Rods
NGK AFX Wideband
Greddy Turbo Timer - <u>SOLD</u>
MOMO Steering Wheel w/ System Upgrade hub adapter
Sparco Racing Seats - local sale pending
Aeromotive FPR w/ Gauge - dibs turboron
Walbro 255lph Fuel Pump
Oil Catch Can
Vacuum Manifold
Electronic Boost Solenoid
RD2 Double Din Surround
VHR Clutch Kit w/ Lightweight Flywheel
OBX Adjustable Cam Gear
440cc Injectors Green Tops
************************************************** *********
ARP Head and Main stud kit
This kit is brand new in the box, purchased from Atomic Speedware. Boxes are still sealed from Atomic. Paid $255, asking $235.
<strike>Prosport Oil Pressure</strike>, EGT, and Boost gauges, as well as Compact Divisions triple gauge pod.
These gauges are all brand new, but were installed in the car. The Oil pressure gauge/sender unit has seen about 5 minutes of use. The EGT has had no use (the gauge was installed but the sender was never installed in the turbo manifold). The Boost gauge (electrical, not mechanical) was installed, and had about 5 minutes of use along with the oil pressure gauge. Note that there is a small dent in the bezel on this gauge, shown in the pics. You can turn the bezel any way you want, so this isn't really noticable when it's installed. They are all the Blue/White Performance Series and are all in mint condition (minus the dent in boost gauge). They go for $43, $94, and $56 respectively on the Prosport site. Selling for $35, $80, and $45, or $160 if you take all 3. If you take all three I'll leave the harnesses attached the way they are so installation is easier for you. I also have the compact divisions fiberglass triple gauge pod shown in the pics. Good fitment, just takes 1 screw and some two sided tape. Paid $130, asking $100, painted black. I also have a second unit, the exact same thing in black primer, but the last 8-10 inches is broken off the top. I have the other piece, you can try and fix it or just use it as is, I'd like $40 for it.
Ross low-comp 82mm Forged Pistons.
These are brand new in the box. Also included are a brand new set of TotalSeal piston rings. The pistons include wrist pins and locking clips. I started gapping one of the rings, but I never got down to the actual size needed. This changes nothing, you will have to gap your piston rings on installation, I'm just being up
front. Asking $500 for this complete set. I paid $600 from a member on RDT, and brand new the pistons alone go for $700+. The ring set sells for over $100.
Complete turbo kit including turbo, manifold, w/g and dump tube, bov, FMIC, piping, DP, oil lines and oil pan. $1350
3" SS Vibrant exhaust, all v-band clamps, $800 or $2000 total with the turbo kit.
Alpine MRD-M605 mono amp $175
This amp was in my car for about 8 months. It is in great condition, the only defects are a very light mark underneath the stainless cover (shown), and I lost one of the allen head screws (shown). This is a great amp.
Sony 444 Amp $50
This is no alpine, but if you're looking for something to run your 40-50 watt speakers, this gets the job done. It's a 4 channel amp. I think I bought it from Australia or something, I couldn't seem to find much info on it. $50 and it's yours.
SpeedHut EL gauge faces KM/H $60
These are black speedhut gauge faces, in KM/H. The pics show it all. Brand new with inverters, installed but never used. The base price on these is $80 from speedhut, I'll take $60. Pic is blurry but you can see them lit up. Goes great with DTN's LED needle mod (shown).
ARK Short Shifter $200
Custom wheel well fibreglass sub box $200
This is a sub box I made. I put roughly 50 hours and $120 worth of material into this. Selling for $200. Add $100 and I'll throw in the 12" Alpine Type R sub that it was designed for!
08-11-2010 | 08:16 PM
#3
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 741
Likes: 0
Vehicle: 2001 Tiburon
I had to divide my posts as I surpassed the max amount of pics in a post.
Rear strut bar $40 - SOLD, pictures removed
Floor Bar $40 - SOLD, pictures removed
Factory Tuned front strut bar - $50
A very nice strut bar. It includes 3 bolt mounting plates, all in excellent condition.
Custom made connecting rods - $400
These rods were also custom made by t4turbotiburon. In a post he claimed they would run past 450HP. He said that his motor had run 28PSI with these rods. I can't verify this for sure, but I believe it's true, thats why I bought them. These are of exceptional quality and they are built like 4 mini tanks!
NGK AFX wideband $200. As shown in the pics. Works great. The harness is cut between the controller and sensorso you can route it through a small hole in the body or wherever you like. I can reconnect them (solder and heat shrink) if you'd like, or just leave it and you can reconnect them once they are run through the holes in your car.
Greddy Turbo Timer - $75 - SOLD, pictures removed
MOMO Steering Wheel Blue/Black w/ tiburon hub adapter $120
Awesome steering wheel with the system upgrade hub adapter. It also has 4 optional pushbuttons for your do-hickeys, and the horn button.
Sparco racing seats w/ tib brackets $700. Local sale pending.
Aeromotive FPR and gauge, purchased from a member here. New - $120
Walbro 255lph fuel pump purchased from a member here. New - $100
Oil catch can. - $10
This was formerly an air separator. I wanted something strong and sturdy that could mount to the firewall instead of one of the plastic ones sold at home depot, that you would normally have just hanging from some hoses... This is a nice industrial unit, the only drawback is it's small.
Vacuum Manifold, I believe tanc makes these. Pretty sure I paid $35 new, asking $25. 5 minutes of use. Includes the fittings, but you can get other sizes at any home depot.
Boost Solenoid - $30.
This is a boost solenoid for use with an electronic boost controller. This particular one is sold for megasquirt, from diyautotune.com, for $39, I'd like $30. I don't have the nuts for the screws, but I'm sure you can get them at home depot... Or just use self-tapping screws to the firewall as I did.
RD2 Double Din Surround - $25 or trade for a single din surround.
VHR Clutch Kit including lightweight flywheel. -$475
This is the same kit sold at kdmstuff for $589. I bought it from Ericy321 a couple of years ago with under 50 miles on it. It was never used on my car. Good for setups up to 350hp, great clutch without the harsh engagement of some other clutches in this power range. Includes lightweight flywheel, clutch disk, pressure plate and throwout bearing.
OBX adjustable cam gear - $35
The same cam gear that's on ebay for about $65. Used with some scratches, but still gets the job done!
5x Ford Racing 440cc AKA 42lb/hr injectors, the greentops. I actually have 5 of them, one for a spare. They are used but I bought and installed the rebuild kits from bosch (new o-rings and the bottom pastic pieces)on 3 of them, and they have not been used since then. I'll get some pics up soon. $120
Rear strut bar $40 - SOLD, pictures removed
Floor Bar $40 - SOLD, pictures removed
Factory Tuned front strut bar - $50
A very nice strut bar. It includes 3 bolt mounting plates, all in excellent condition.
Custom made connecting rods - $400
These rods were also custom made by t4turbotiburon. In a post he claimed they would run past 450HP. He said that his motor had run 28PSI with these rods. I can't verify this for sure, but I believe it's true, thats why I bought them. These are of exceptional quality and they are built like 4 mini tanks!
NGK AFX wideband $200. As shown in the pics. Works great. The harness is cut between the controller and sensorso you can route it through a small hole in the body or wherever you like. I can reconnect them (solder and heat shrink) if you'd like, or just leave it and you can reconnect them once they are run through the holes in your car.
Greddy Turbo Timer - $75 - SOLD, pictures removed
MOMO Steering Wheel Blue/Black w/ tiburon hub adapter $120
Awesome steering wheel with the system upgrade hub adapter. It also has 4 optional pushbuttons for your do-hickeys, and the horn button.
Sparco racing seats w/ tib brackets $700. Local sale pending.
Aeromotive FPR and gauge, purchased from a member here. New - $120
Walbro 255lph fuel pump purchased from a member here. New - $100
Oil catch can. - $10
This was formerly an air separator. I wanted something strong and sturdy that could mount to the firewall instead of one of the plastic ones sold at home depot, that you would normally have just hanging from some hoses... This is a nice industrial unit, the only drawback is it's small.
Vacuum Manifold, I believe tanc makes these. Pretty sure I paid $35 new, asking $25. 5 minutes of use. Includes the fittings, but you can get other sizes at any home depot.
Boost Solenoid - $30.
This is a boost solenoid for use with an electronic boost controller. This particular one is sold for megasquirt, from diyautotune.com, for $39, I'd like $30. I don't have the nuts for the screws, but I'm sure you can get them at home depot... Or just use self-tapping screws to the firewall as I did.
RD2 Double Din Surround - $25 or trade for a single din surround.
VHR Clutch Kit including lightweight flywheel. -$475
This is the same kit sold at kdmstuff for $589. I bought it from Ericy321 a couple of years ago with under 50 miles on it. It was never used on my car. Good for setups up to 350hp, great clutch without the harsh engagement of some other clutches in this power range. Includes lightweight flywheel, clutch disk, pressure plate and throwout bearing.
OBX adjustable cam gear - $35
The same cam gear that's on ebay for about $65. Used with some scratches, but still gets the job done!
5x Ford Racing 440cc AKA 42lb/hr injectors, the greentops. I actually have 5 of them, one for a spare. They are used but I bought and installed the rebuild kits from bosch (new o-rings and the bottom pastic pieces)on 3 of them, and they have not been used since then. I'll get some pics up soon. $120
08-19-2010 | 03:47 PM
#5
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 741
Likes: 0
Vehicle: 2001 Tiburon
Haven't heard anything from red97tib so strut bars are available again.
Cmon there's alot of great stuff here! I'm open to offers if you think my prices are too high, but please don't lowball me.
edit; red97tib has dibs on rear and floor bar now
Cmon there's alot of great stuff here! I'm open to offers if you think my prices are too high, but please don't lowball me.
edit; red97tib has dibs on rear and floor bar now
08-24-2010 | 08:55 PM
#8
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 741
Likes: 0
Vehicle: 2001 Tiburon
Found a few more things today. Added to the first/second post.
VHR Clutch Kit including lightweight flywheel. -$475
This is the same kit sold at kdmstuff for $589. I bought it from Ericy321 a couple of years ago with under 50 miles on it. It was never used on my car. Good for setups up to 350hp, great clutch without the harsh engagement of some other clutches in this power range. Includes lightweight flywheel, clutch disk, pressure plate and throwout bearing.
OBX adjustable cam gear - $35
The same cam gear that's on ebay for about $65. Used with some scratches, but still gets the job done!
I also just remembered I have a set of mustang 440cc AKA 42lb/hr injectors, the greentops. I actually have 5 of them, one for a spare. They are used but I bought and installed the rebuild kits from bosch (new o-rings and the bottom pastic pieces), and they have not been used since then. I'll get some pics up soon. $120
Also added pics of the custom made connecting rods. They are actually alot nicer than I originally thought. Also notice I have 4 wiseco pistons, however one is pretty damaged. Good if you need a replacement one. I believe they are for 82.5mm bore, I will measure properly if there is any interest.
VHR Clutch Kit including lightweight flywheel. -$475
This is the same kit sold at kdmstuff for $589. I bought it from Ericy321 a couple of years ago with under 50 miles on it. It was never used on my car. Good for setups up to 350hp, great clutch without the harsh engagement of some other clutches in this power range. Includes lightweight flywheel, clutch disk, pressure plate and throwout bearing.
OBX adjustable cam gear - $35
The same cam gear that's on ebay for about $65. Used with some scratches, but still gets the job done!
I also just remembered I have a set of mustang 440cc AKA 42lb/hr injectors, the greentops. I actually have 5 of them, one for a spare. They are used but I bought and installed the rebuild kits from bosch (new o-rings and the bottom pastic pieces), and they have not been used since then. I'll get some pics up soon. $120
Also added pics of the custom made connecting rods. They are actually alot nicer than I originally thought. Also notice I have 4 wiseco pistons, however one is pretty damaged. Good if you need a replacement one. I believe they are for 82.5mm bore, I will measure properly if there is any interest.