Alright, Update guys. I got the car delivered today and we got started at it, to my surprise the wreckers decided to part with anything that was hanging loose off the front end, and they didnt throw the parts in the trunk for me, they through them out, thanks guys. OK so, there are NO headlights, NO front bumper cover, NO front Bumber, the passenger fender is toast, the driver fender is ok with a little dent. Everything behind the firewall seems to be OK, except for the blown bags and the cracked windshield. Its an auto and the damn motor stills runs, i didnt believe it but i drove it into the garage. So, parts are now comming off, im gonna have a master price list soon but for now you can try making offers.

 

UPDATE
The car is orginized into neat little piles around my gargae now, we are pulling apart the last of the suspension and I saved the motor/trans for last. SO, I have the following items for sale, and anything that would have been in between these parts that I dont list is probubly there too, so ask me. All body panels are black, unless othwise posted.

Driver side door frame, glass(tinted) power window motor, regulator, inside door panel, 200$

Passenger side door frame, glass(tinted) power window motor, regulator, inside door panel (small crack) 200$

Driver side fender, black, small dent, chipped paint, but a straight fender. 80$

Rear Hatch, black, no wiper with classic SHARK wing. 300$

Rear bumper assembly, comlete, ill unbolt whatever you need, 50$

Grey cloth seats, front and back, 100$

Trunk lining, floor board and spare cover, 15$ a peice

Interior quarter panels, the peices that cover our 6x9's, 30$ each

roof liner, non-sunroof, 30$

Consol, comes with an auto bezel and no compartment lid, 45$

Automatic shifter assembly, 25$

Parking brake handle assembly, 15$

Door sills, black vinyl, 25$ set.

Dash components, Make an offer

Drivers side lower engine side cover, 20$

Right axle shaft, auto, 30$

Left axle shaft, auto, 30$

Coolant resevoir, 10$

1.8l auto 1997 ECU, 50$

Driver side skirt, clean, 45$

Passenger side skirt, clean, 45$

Rear suspension, complete drivers or passenger side assembly, 50$ or 80$ for both.

Front struts, stock springs, 60 set.

front control arms, 60 each


Ill update this later, there is a lot more, and there will be spare parts from my tib oncethis stuff goes on my car. all prices are plus shipping and OBO. As stuff goes ill take it off this post.

 

UPDATE
The car is orginized into neat little piles around my gargae now, we are pulling apart the last of the suspension and I saved the motor/trans for last. SO, I have the following items for sale, and anything that would have been in between these parts that I dont list is probubly there too, so ask me. All body panels are black, unless othwise posted.

Driver side door frame, glass(tinted) power window motor, regulator, inside door panel, 200$

Passenger side door frame, glass(tinted) power window motor, regulator, inside door panel (small crack) 200$

Driver side fender, black, small dent, chipped paint, but a straight fender. 80$

Rear Hatch, black, no wiper with classic SHARK wing. 300$

Rear bumper assembly, comlete, ill unbolt whatever you need, 50$

Grey cloth seats, front and back, 100$

Trunk lining, floor board and spare cover, 15$ a peice

Interior quarter panels, the peices that cover our 6x9's, 30$ each

roof liner, non-sunroof, 30$

Consol, comes with an auto bezel and no compartment lid, 45$

Automatic shifter assembly, 25$

Parking brake handle assembly, 15$

Door sills, black vinyl, 25$ set.

Dash components, Make an offer

Drivers side lower engine side cover, 20$

Right axle shaft, auto, 30$

Left axle shaft, auto, 30$

Coolant resevoir, 10$

1.8l auto 1997 ECU, 50$

Driver side skirt, clean, 45$

Passenger side skirt, clean, 45$

Rear suspension, complete drivers or passenger side assembly, 50$ or 80$ for both.

Front struts, stock springs, 60 set.

front control arms, 60 each


Ill update this later, there is a lot more, and there will be spare parts from my tib oncethis stuff goes on my car. all prices are plus shipping and OBO. As stuff goes ill take it off this post.

 

hey, do you have the driver's side fender liner? (the plastic part right on top of the wheel)

if it's not broken, i'll take it. (i'm in GTA!)

also, what's the condition on the rubber moulding for the door windows?

i might take those if they're in good condition

where exactly are you located?

 

hey, do you have the driver's side fender liner? (the plastic part right on top of the wheel)

if it's not broken, i'll take it. (i'm in GTA!)

also, what's the condition on the rubber moulding for the door windows?

i might take those if they're in good condition

where exactly are you located?

 

The fender liners were destroyed by meat head at the wreckers, i know i just replaced mine. The moulding were all in fine shape, I hung on to ALL of the door moldings, top, bottom, inside, outside, i got em. Im actually from outside the city, the far side of Oshawa.

 

The fender liners were destroyed by meat head at the wreckers, i know i just replaced mine. The moulding were all in fine shape, I hung on to ALL of the door moldings, top, bottom, inside, outside, i got em. Im actually from outside the city, the far side of Oshawa.

 

from the looks of the picture it has a shark spoiler....how much for the just the shark spoiler? Also, price include shipping, if not how about a quote to 23322 USA

 

from the looks of the picture it has a shark spoiler....how much for the just the shark spoiler? Also, price include shipping, if not how about a quote to 23322 USA

 

damn, that car looks easy to fix up. if that were over here i'd buy it, fix it, and hook it up! gold rims, F2 Bumper and you're all set hahah.

nah but if it's an automatic then it's not really worth putting work into. also it's probably at the salvage yard for a reason. frame might be bent, something. good luck deciding.