I know most of you aren’t to happy about me posting all the items I had for sale on here before and then basically dropping off the face of the earth. Well I could tell you why or give excuses or whatever but most of you wouldn’t believe me nor care. But anyways as I said I sincerely do apologize for before it will not happen again. I just wanted to post on here that everything I had to sell is now on e-bay for cheap so if you guys want any of it you can go on there and probably save yourself some money. I had my cousin go and take pictures of everything and get a lot of the stuff that was left out of storage. One problem I ran into was that my storage company “mistakenly” sent a lot of the good items such as exhaust, header, and well basically all of my aftermarket stuff that I had in those two crates to some guy that moved to damn Washington. So long story short what I ended up having them do was just pay me for all the items because they wanted me to pay to get them back here. Now I believe they are going auction them off or some crap. Well I have to go but I just wanted to tell you guys if you still want any of it its all going on e-bay. Some of it is already posted but not all quite yet. All the items are being sold under the account name bmxrmm Thank you.

PARTS AND PRICES

Stock front leather seats – On E-bay $75 6 hours left no bids. Shipping will be like $100 I’m guessing.
AEM CAI – On E-bay $41 6 hours left.
MBRP exhaust – From my friends RD2 used a couple months $150.00.
Interior sunroof panel - $15 shipped
Interior sunroof panel - $15 shipped
5 18” Racing Hart CX rims with 215/35/18 tires – Gunmetal with polished lips and polished center caps minor scraps on the lips on a few of them small 1/3” scratch on one spoke about 5 small square looking indentations on another rims spoke and need three tires replaced cost about $2500 asking $1000
Stock wing - $60 shipped.
Terminator II wing Good shape $80.
Veilside sideskirts - The real deal but the raised veilside logos were shaved off. They will be like $220.
Veilside rear bumper The real thing and is $220.
Z-3 vents - brand new and have the holes cut and are going to be $30 a set shipped.
X-1 vents - brand new and have the holes cut and are going to be $30 a set shipped.
Stock springs and shocks Good shape and are $100 shipped for all four shocks and four springs.
Custom tubular turbo manifold - Flange for 35-38mm wastegate brand new $250 shipped
Ram air hood scoop New $120 shipped
Speed factor intercooler piping kit New with flange for greddy style bov $180 shipped
Speed factor turbo oil line - New $50 shipped
Clear corners New from K-spec $55 shipped
Carbon fiber sunroof New paid over $400 looking for $300 shipped
Venom 400 module I never used but previous owner did $100 shipped
Stainless steel race cat New $35 shipped
B&M short throw shifter - $45 shipped
KYB shocks New $240 shipped with coil-overs $150 shipped alone
Arospeed coil-overs New $240 shipped with shocks $100 shipped alone
White glow gauge kit New blue to green $10 shipped
Front and rear shark racing strut bars - $60 shipped together or $30 a piece shipped
Gunmetal taillights - $50 shipped
Sparkco 3 core 9.0mm spark plug wires New red made in the USA $30 shipped
Stock side skirts $70 shipped
AEM bypass valve – 3” never installed $35 shipped
Stock front bumper – On E-bay $50 6 hours left
Right fender – On E-bay $20 6 hours left

I have pictures of all the items if needed e-mail me at bmxrrm15@sbcglobal.net and I will send them to you.

That’s all the aftermarket stuff I remember and the items I have on E-bay right now. And as for blacktibs vertical door kit I’m not what I’m going to be doing with it.

 

http://search.ebay.com/_W0QQfgtpZ1QQ...5QQsassZbmxrmm

aem for 80 bucks at buy it now! fing02.gif

thanks for the info bud, hopefully someone looking for one will see this.

 

Alright I post this in my old ad but I want to make sure everyone can see this. I am parting out the tib. Everything is for sale including blacktibs vert door kit. If someone on here wants something just email me at bmxrrm15@sbcglobal.net and I will reply as soon as I can. I will give you guys some time to decide if you want anything before I have my cousin throw them on e-bay. Thanks guys.

 

What are the prices on all these things? The For Sale forum rules require prices and you will get better response if you price the items anyway.

How much for the clear corners shipped to Oakville, Ontario, Canada?

 

yeah... gotta have prices.

how much for the flex-a-lites I'll get em if it's not too much and did you have a single or double din stereo (2" or 4"). if it's the 2" type i want the plastic piece that goes around the stereo.

thanks!! fing02.gif

 

Dibs on KYB's, pending asking price.

 

i want the gunmetal tails, do you have pics of it: off or even on the car? how much would you like for it?

send it to jay_m05@yahoo.com

thanks

 

Also...the rims, what color, size, weight, and price? Pics? Doubleaurn@hotmail.com

 

How much for the clear corners?

Who made the strut bars?

EDIT: If it's on ebay then I guess I will be bidding smile.gif

 

Okay here are his new parts and prices. post in here or pm him.

VS - if you need to update just send me a pm.