Diy: Ultimate Upgrade
#1
Thread Starter
Moderator
Joined: Feb 2009
Posts: 11,731
Likes: 5
From: Leesville, Louisiana
Vehicle: 2001 Hyundai Tiburon
you will need:
Soldering Iron: Optional*
Wire Stripper: Optional*
Multimeter: Optional*
Box and Open End Wrench set: Optional*
Vice Grips: Optional*
Muffler Belt Tensioner: Optional*
2 Double Stuff Oreos
Corona W/ Lime
Performing the Modification
1. Start By Placing Oreos on flat surface
2. Separate oreos and discard cookie pieces which have no cream filling attached
3. Press pieces of cookie with filling together( this is the tricky part, details by request of blank_00Tib)
Finishing Up
If you have performed the modification correctly, It should look something like this.
Congratulations, you now have a delicious QUADRUPLE STUFF Oreo cookie
Enjoy!
Soldering Iron: Optional*
Wire Stripper: Optional*
Multimeter: Optional*
Box and Open End Wrench set: Optional*
Vice Grips: Optional*
Muffler Belt Tensioner: Optional*
2 Double Stuff Oreos
Corona W/ Lime
Performing the Modification
1. Start By Placing Oreos on flat surface
2. Separate oreos and discard cookie pieces which have no cream filling attached
3. Press pieces of cookie with filling together( this is the tricky part, details by request of blank_00Tib)
- Pick up both cookie pieces with your bare hands
- examine cookies to determine which hemicylinder of the cookie has the creamy white filling
- Grasp cookie in your left hand firmly so as to hold only the crunchy oreo cookie between your fingertips
- grasp cookie in your right hand so as to hold only the crunchy oreo cookie between your finger tips
- rotate both cookies so as to ensure that the creamy filling hemicylinders are facing each other.
- slowly bring cookies together and align the creamy white filling as closely as possible so as to create one large cylinder of oreo cookie filling.
Finishing Up
If you have performed the modification correctly, It should look something like this.
Congratulations, you now have a delicious QUADRUPLE STUFF Oreo cookie
Enjoy!