Screwdriver's Additive Regimen
#12
Senior Member
Thread Starter
Join Date: May 2005
Location: Chicago, IL
Posts: 1,141
Likes: 0
Received 0 Likes
on
0 Posts
To get the ports looking like that I used the following additives in this order:
1) Chevron Technron X 1 (12 Oz.)
2) Fuel Power FR60 X 1/2 gallon Website
3) Seafoam through the brake booster line X 2 cans
4) Chevron Techron X 1 (12 Oz.)
5) Lucas Upper Cylinder Lubricant X 1 (5.25 Oz.)
In addition, I used Auto-Rx to clean the oil chamber. I have posted about this product several times.
The combination of these products have lead to a like new feel to the car. Hope this helps you guys. Good Luck!
1) Chevron Technron X 1 (12 Oz.)
2) Fuel Power FR60 X 1/2 gallon Website
3) Seafoam through the brake booster line X 2 cans
4) Chevron Techron X 1 (12 Oz.)
5) Lucas Upper Cylinder Lubricant X 1 (5.25 Oz.)
In addition, I used Auto-Rx to clean the oil chamber. I have posted about this product several times.
The combination of these products have lead to a like new feel to the car. Hope this helps you guys. Good Luck!
#16
Senior Member
Join Date: Jul 2006
Location: Bryan, TX
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
<div class='quotetop'>QUOTE (Screwdriver @ May 8 2006, 09:05 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Seafoam through the brake booster line X 2 cans
Chevron Techron X 1 (12 Oz.)
Lucas Upper Cylinder Lubricant X 1 (5.25 Oz.)
Auto-Rx</div>
Where do you get these products? Should the local Autozone/NAPA carry them?
Chevron Techron X 1 (12 Oz.)
Lucas Upper Cylinder Lubricant X 1 (5.25 Oz.)
Auto-Rx</div>
Where do you get these products? Should the local Autozone/NAPA carry them?