Removing Crank Pulley
#12
Senior Member
Join Date: May 2006
Posts: 1,494
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1998/Hyundai/Tiburon FX
Well, I used a small pry bar very carefully and took my time with it to remove mine. No problems, bends or cracks.
Just put a peice of rubber on the back side of the pulley and work around it with the pry bar in a circular motion (or one side to the other). Continue going back and forth until it comes off.
Do not get impatient here though, you dont want to f up your pulley.
Oh yeah, a little PB Blaster or similar lubricant wouldnt hurt either. smile.gif
Good luck.
Just put a peice of rubber on the back side of the pulley and work around it with the pry bar in a circular motion (or one side to the other). Continue going back and forth until it comes off.
Do not get impatient here though, you dont want to f up your pulley.
Oh yeah, a little PB Blaster or similar lubricant wouldnt hurt either. smile.gif
Good luck.