Reading Cel
#11
Senior Member
Thread Starter
Join Date: May 2006
Posts: 4,722
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Well, running out of ideas.
1. Checked all the fuses - all seem fine. I changed all the high amp ones the other day that are hard to see into, all the normal smaller ones are fine. I can't see where this would be fused anywhere anyway in the sticky in the electrical forums.
2. Followed the wiring back to the harness a few feet, its fine, no cuts or breaks. Gave it a few tugs and none are loose. So the wiring seems fine.
3. Took off the turbo timer to see if how it was wired was messing with the reader's ability to connect. No go.
4. Tried multiple readers.
----
Only thing left that I've wired is the SMT-6, and none of those wires should have any interference with wires going to the reader I would I imagine.
Any ideas?
1. Checked all the fuses - all seem fine. I changed all the high amp ones the other day that are hard to see into, all the normal smaller ones are fine. I can't see where this would be fused anywhere anyway in the sticky in the electrical forums.
2. Followed the wiring back to the harness a few feet, its fine, no cuts or breaks. Gave it a few tugs and none are loose. So the wiring seems fine.
3. Took off the turbo timer to see if how it was wired was messing with the reader's ability to connect. No go.
4. Tried multiple readers.
----
Only thing left that I've wired is the SMT-6, and none of those wires should have any interference with wires going to the reader I would I imagine.
Any ideas?