Phenolic Spacer Results From Outlaw
#1
Hey gys just go tthem finished intalled, the IM stays cool when the engines hot, I also bored the IM and smoothed up the TB, but here are the gtech results
Yea the numbers are low its gtech its for the change not to say theyre low.
Before:
HP: 96.7
TQ: 101.7
1/8 speed: 63.82
After:
HP: 101.8
TQ: 112.2
1/8 speed: 68.70
Edit the title I just reads it again the results arent from outlaw the spacers are if that was confused in the title sorry.
Yea the numbers are low its gtech its for the change not to say theyre low.
Before:
HP: 96.7
TQ: 101.7
1/8 speed: 63.82
After:
HP: 101.8
TQ: 112.2
1/8 speed: 68.70
Edit the title I just reads it again the results arent from outlaw the spacers are if that was confused in the title sorry.
#3
Nice gains but how similar were the conditions of each run? Temp, humidity, etc...
Also, the fact that you also bored out your IM means it's impossible to tell just how much can be attributed to the spacers.
Also, the fact that you also bored out your IM means it's impossible to tell just how much can be attributed to the spacers.
#4
Yea I thought bout getting just the spacers on but then I realized that would waste and extra 3 hrs or so and I need to get to work tommorow. The conditions were about the samenothign that would affect the hp by 1 or more, it was cool, shorts tee-shirt and flip flops
#5
Moderator
Joined: Mar 2006
Posts: 6,976
Likes: 0
From: Arizona
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
thanks for posting, a lot of people are curious and you have somewhat ansered their questions.
How accurate is the weight you entered for the gtech?
How accurate is the weight you entered for the gtech?
#8
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Ehh, that's about right. A BTB or a BIM isn't going to do MUCH, on HA.com it was rated as 2 HP for that alone. With the spacers installed, that's about right.
Good thing is, it's a gift that keeps on giving, just like the BTB and BIM.
Good thing is, it's a gift that keeps on giving, just like the BTB and BIM.
#9
Senior Member
Joined: Aug 2009
Posts: 11,992
Likes: 0
From: Washington D.C.
Vehicle: Hyundai Tiburon FX
^ agreed. ever push your car when it first starts? it's really agressive! the rpm's thrust from the cold air. this will at least keep that agressiveness 85% of the time. the other 15% would be due to the engine being hot itself. I'll have results after new years.