Nopi Workups...
#11
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
<div class='quotetop'>QUOTE (hyper25 @ Mar 16 2006, 10:06 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Im doing everything to the car and pulling my hair out at the same time...lol.... hey how long would it take to get the gt wing in from korea redz? in carbon fiber</div>
I don't think we can get them in CF anymore, GTwing is anal about letting the CF ones only go to specific distributors.
If it's on the site though, we can. Our shipping times are in our FAQ, about 10 to 14 business days, but you can get it in as little as 4 days.
Latest stuff done.
1. Repaired my trunk lights, now the REDZ Trunk Light Mod lives again!
2. Installed whiteline rear strut bar. NOW MY BACK SEATS CAN CLOSE AGAIN!!! WOOHOO!!! Damn that bar looks so friggin good, fits way better than any other rear bar I've seen.
3. Put new vaccum hose (Samco) across the entire engine bay. Looks fantastic.
4. Installed catch can. Matches everything perfectly and found the perfect spot for it, looks like it's supposed to go there. Pics will be up after Nopi prolly, just gotta run the hoses for it today.
5. Replaced all of my clamps in the engine bay with Breeze T Bolt Clamps. WOW! It's really lookin nice in there.
I'm putting in my FAL 220's today.
I don't think we can get them in CF anymore, GTwing is anal about letting the CF ones only go to specific distributors.
If it's on the site though, we can. Our shipping times are in our FAQ, about 10 to 14 business days, but you can get it in as little as 4 days.
Latest stuff done.
1. Repaired my trunk lights, now the REDZ Trunk Light Mod lives again!
2. Installed whiteline rear strut bar. NOW MY BACK SEATS CAN CLOSE AGAIN!!! WOOHOO!!! Damn that bar looks so friggin good, fits way better than any other rear bar I've seen.
3. Put new vaccum hose (Samco) across the entire engine bay. Looks fantastic.
4. Installed catch can. Matches everything perfectly and found the perfect spot for it, looks like it's supposed to go there. Pics will be up after Nopi prolly, just gotta run the hoses for it today.
5. Replaced all of my clamps in the engine bay with Breeze T Bolt Clamps. WOW! It's really lookin nice in there.
I'm putting in my FAL 220's today.
#12
Senior Member
DAAAAAAAAAAAAAAAAAAAAAMMMMMMMMMMMMMMMMMMNNNNNNNNNN NNNNNNNN!!!!!!!
No wonder you couldn't afford entrance into the show! laugh.gif laugh.gif nana.gif nana.gif
Cant wait to see it man! smile.gif
No wonder you couldn't afford entrance into the show! laugh.gif laugh.gif nana.gif nana.gif
Cant wait to see it man! smile.gif
#13
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Dude, I stepped away from my car engine bay and smiled. Big time. I'm friggin hooked again.
But DAMN my hands hurt from those clamps. LOL
Anyways, you get the map?
But DAMN my hands hurt from those clamps. LOL
Anyways, you get the map?
#17
Moderator
Join Date: Mar 2006
Location: Arizona
Posts: 6,976
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
Can't wait to see the car REDZMAN...
LOL, I wish I could be working on the car as much as you. But my parts are still sittin under the bed, I lost my wallet and have been uber busy here in Prescott, sheet my car is probably gonna still be muddy from the snow when I meet you in Flag. LMAO...
Well, MAYBE I'll clean it.
Besides (I'm the one who's going to have my car on jackstands during the show), LOL, I dun really give a sh!t about Nopi's car shows...
I still like to go though...
But congrats on your work, I bet your engine bay blows away half of RDTiburon.com's engine bays...
LOL, I wish I could be working on the car as much as you. But my parts are still sittin under the bed, I lost my wallet and have been uber busy here in Prescott, sheet my car is probably gonna still be muddy from the snow when I meet you in Flag. LMAO...
Well, MAYBE I'll clean it.
Besides (I'm the one who's going to have my car on jackstands during the show), LOL, I dun really give a sh!t about Nopi's car shows...
I still like to go though...
But congrats on your work, I bet your engine bay blows away half of RDTiburon.com's engine bays...
#18
Senior Member
Join Date: Aug 2006
Posts: 1,553
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Thinking about entering Nopi in NJ. I have lots of time though (end of July) so Im not really worried about anything.
Things I <u>have</u> to get done:
<strike>Fix the car.</strike> (should be good now though)
Tune the car. (via Viper966)
Clean the engine bay.
Things Im going to get (also done) before the show:
Airram
65 mm BBTB
Strut bar
Polish the piping in the car.
Paint the dash
Install Haloz
Put on the FB hood (if it ever gets here..jk jk redz tongue.gif)
Install the HKS catch can
Get the whole car cleaned on the inside
Install the speaker box + amp
Put on the 17s
Possible things:
Get the Cuda body kit (for looks and to just make the 17s as well as the front of the car look better)
New paint job (I have too many scratches on the paint right now..not my fault btw)
Thats about it. Nopi would be my first show so Im pretty excited. smile.gif
Things I <u>have</u> to get done:
<strike>Fix the car.</strike> (should be good now though)
Tune the car. (via Viper966)
Clean the engine bay.
Things Im going to get (also done) before the show:
Airram
65 mm BBTB
Strut bar
Polish the piping in the car.
Paint the dash
Install Haloz
Put on the FB hood (if it ever gets here..jk jk redz tongue.gif)
Install the HKS catch can
Get the whole car cleaned on the inside
Install the speaker box + amp
Put on the 17s
Possible things:
Get the Cuda body kit (for looks and to just make the 17s as well as the front of the car look better)
New paint job (I have too many scratches on the paint right now..not my fault btw)
Thats about it. Nopi would be my first show so Im pretty excited. smile.gif
#20
Senior Member
Join Date: Mar 2006
Location: Ashland, KY
Posts: 4,244
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001/Hyundai/Tiburon
well I've been installing but not for nopi.
last night:
installed gsx fuel pump
installed door relay's (for auto up) and ran them to factory fog switch I installed in the dash
mounted the vortech fmu.
swapped the wheels back to the velox's from my winter stockies.
last night:
installed gsx fuel pump
installed door relay's (for auto up) and ran them to factory fog switch I installed in the dash
mounted the vortech fmu.
swapped the wheels back to the velox's from my winter stockies.