Motoria Catback
11-19-2006, 10:22 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2007
Location: home
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: car
I'd like to get it but it's "Currently Out Of Stock"... Anywhere else I can get one, or a decent catback? My dads buying me a part for my 18th b-day today so i chose fart cannon. Any help?
11-19-2006, 11:10 PM
#3
Senior Member
Join Date: Mar 2006
Posts: 5,754
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Tiburon
^^^ I think you have been misinformed my friend.
Only difference is the apexi removes the last bend. Which yes, it helps, but nothing you would notice.
Material is the same
Pipe thickness is the off by .002mm. Nothing you would notice.
Welds are perfect on both exhausts.
Price, I think we all know who wins.
Bragging rights, well we all know who wins there.
Only difference is the apexi removes the last bend. Which yes, it helps, but nothing you would notice.
Material is the same
Pipe thickness is the off by .002mm. Nothing you would notice.
Welds are perfect on both exhausts.
Price, I think we all know who wins.
Bragging rights, well we all know who wins there.
11-19-2006, 11:14 PM
#4
Senior Member
Join Date: Mar 2006
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 01 Tiburon SE
was debating between the two as well for for when i buy it down the road, figured the motoria is the better bang for the buck, cant seem to find a place that has them in stock though, importshark doesnt, ebay doesnt have them
11-20-2006, 08:47 AM
#5
Senior Member
Thread Starter
Join Date: Dec 2007
Location: home
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: car
Yea. I've been looking for the Motoria as well, but I don't have any luck whatsoever finding it so I've kind of lost hope.... I looked at the same places as you did. www.AndysAutoSport.com is where I found the HKS, they also have a Pace Setter. The thing the really bothers me is there's no direct application pictures... I know it sounds ricy, but I want a big nice looking exhaust, not something that looks stock. Otherwise I'd just keep my stock...... Is there anyone who makes a dual exhaust for a RD1??
11-20-2006, 09:27 AM
#6
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
^^^
The HKS is just a rear section, muffler and about 2 feet of piping. Don't get it.
The Pacesetter is all black, made like shit, and rusts within a month or 2.
<div class='quotetop'>QUOTE (tanc @ Nov 19 2006, 11:10 PM) <{POST_SNAPBACK}></div><div class='quotemain'>^^^ I think you have been misinformed my friend.
Only difference is the apexi removes the last bend. Which yes, it helps, but nothing you would notice.
Material is the same
Pipe thickness is the off by .002mm. Nothing you would notice.
Welds are perfect on both exhausts.
Price, I think we all know who wins.
Bragging rights, well we all know who wins there.</div>
No, not at all. The Moteria still goes UP and over the axle, with a very sharp bend above it, the Apexi goes under the axle.
I personally would HIGHLY recommend the Apexi. I've been around all of these exhausts and the Apexi SOUNDS the best and from dyno's on the site, gives the most.
The HKS is just a rear section, muffler and about 2 feet of piping. Don't get it.
The Pacesetter is all black, made like shit, and rusts within a month or 2.
<div class='quotetop'>QUOTE (tanc @ Nov 19 2006, 11:10 PM) <{POST_SNAPBACK}></div><div class='quotemain'>^^^ I think you have been misinformed my friend.
Only difference is the apexi removes the last bend. Which yes, it helps, but nothing you would notice.
Material is the same
Pipe thickness is the off by .002mm. Nothing you would notice.
Welds are perfect on both exhausts.
Price, I think we all know who wins.
Bragging rights, well we all know who wins there.</div>
No, not at all. The Moteria still goes UP and over the axle, with a very sharp bend above it, the Apexi goes under the axle.
I personally would HIGHLY recommend the Apexi. I've been around all of these exhausts and the Apexi SOUNDS the best and from dyno's on the site, gives the most.
11-20-2006, 10:45 AM
#8
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Have him only pay for a portion of it then.
http://www.rdtiburon.com/index.php?showtopic=18563&hl=
I'm just one of those guys, I get the best of anything I can.
http://www.rdtiburon.com/index.php?showtopic=18563&hl=
I'm just one of those guys, I get the best of anything I can.
11-20-2006, 06:54 PM
#10
Senior Member
Join Date: Mar 2006
Posts: 5,754
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Tiburon
Jeremy, I did mention that the Apexi removes a restriction smile.gif
I should get a sound clip of my exhaust, it's a bit different now with a new muffler than the old clip I have.
Also I started playing GOW and 3 words....
HOLY SHIT SON
I should get a sound clip of my exhaust, it's a bit different now with a new muffler than the old clip I have.
Also I started playing GOW and 3 words....
HOLY SHIT SON