tktibby01

hey guys so Urson sent me his injen cai and i was attempting to install it by myself today. it got too dark and the lighting in my garage sucks so i decided to just put everything back in and start again tomorrow. I got what i thought was everything back together and i started the tib up and it was going in and out of idle and the rpms were not staying constant. Can anyone help me out either with what my problem is or how to install the cai. Videos, pictures, anything would help. I have work in the morning and would like to get out tonight as well. Thanks

likeyoumeanit

I would put money on saying that you put the maf in backwards

UrS0NvS

^^^ never thought of that, duh.

I did tell him about iac hosing and he said it was reinstalled.

likeyoumeanit

I know the first time I put my stuff back together in the dark I forgot about that

tktibby01

propssssss to likeyoumeanit. youre a life saver dude. Now if only i can get the injen cai in and send the elbow to lee...i could really use a good install video. Thanks though guys

majik

FYI... the arrow on the MAF shows the direction of the airflow.

tktibby01

this is true. so the only thing i really couldnt get was unconnecting the maf, how does that work? and actually the whole air box, i got the lid off really easily but unsure how to get the whole thing off

likeyoumeanit

once the lid and the filter are out of the airbox there are two (10mm?) bolts in the bottom, remove those and lift

dddude55

Take the bolts out of the bottom of it....

The maf sensor is held in like all other connections on the tib, by a metal "staple" that you need to use a screwdriver to get off.

nos4atu

Here:

http://www.rdtiburon.com/index.php?showtopic=53

I'll be back for my spoon later.




J/K