Fuel Pressure Guage For Aeromotive Fpr
#1
Guest
Posts: n/a
hey guys, right now, i have an autometer guage with about 1.5 ft of hose attached to my fpr for fuel pressure, and the needle broke on it, so i wanna get a guage to thread right into the aermotive fpr fuel psi tapped hole.
anyone know of a good one or where i can get one of these?
thanx
nate
anyone know of a good one or where i can get one of these?
thanx
nate
#3
Moderator
^^^^Word!
I'm using a $16 Autometer mechanical gauge I got off ebay. It screws right in.
I'm using a $16 Autometer mechanical gauge I got off ebay. It screws right in.
#5
Moderator
It's the typical 2 1/16" gauge with a backlight. White face I believe. I didn't care what model I had in the engine bay. I just got one off Ebay that was super cheap and Autometer. I tapped the light wire into the corner lamp so it came on when the rest of them did.
#7
Moderator
I was actually thinking of getting rid of mine one day and converting to the electrical one so I can mount it in my pillar. It would be nice to see the fuel pressure at ALL times, and when boosting. Instead of only when idling with the hood up. But the electrical one is like $200.
#8
Moderator
Join Date: Mar 2006
Location: Arizona
Posts: 6,976
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: N/A as in Not Applicable, not Naturally Aspirated
#9
Guest
Posts: n/a
eventually, imma get an electrical fuel psi guage, cuz i cant stand only seeing idle fuel psi, even tho i trust my fpr..
and get a better wideband.. well not better persay, but one that records, shows other stuff, boost, etc.. like that one pat showed up..
ill prog upgrade from the plx M-300 to the plx R-500 smile.gif
and get a better wideband.. well not better persay, but one that records, shows other stuff, boost, etc.. like that one pat showed up..
ill prog upgrade from the plx M-300 to the plx R-500 smile.gif