Hyundai Tiburon Forum The Hyundai Tiburon Forum. Get all the questions you have about the RD, GK, and FL Tiburon answered here. Find out why the Hyundai Tiburon is Korea's most popular tuning platform.

Ecu Is Stuck!

Thread Tools
 
Old 04-08-2007, 11:00 PM
  #11  
http://www.hyundaiaftermarket.org/images/vendor1.png
 
Denisst99's Avatar
 
Join Date: May 2002
Location: Canada
Posts: 1,500
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: x3 accent gk tiburon santa fe
Default

nah, def. no need to take the little phillip screw out ;-)
Old 04-09-2007, 07:10 AM
  #12  
Administrator
 
majik's Avatar
 
Join Date: Oct 2002
Location: ɯooɹpǝq ɹnoʎ
Posts: 13,943
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: ǝdnoɔ sısǝuǝƃ
Default

I took the phillips screw out.

Mine was a PITA to remove. Took me 45 minutes, I was afraid of breaking it.

You'll have to pull the passenger side of the harness down to about a 60º angle, til it feels like it's going to snap off, then slide it out. You may want to try to look in the left side while pulling down on the right side, stick a flat head in there to pry it out or loosen the clip holding it in.

Took me FOREVER... called SOCKS at least twice saying, "Are you sure this thing isn't going to break?"
Old 04-09-2007, 08:38 AM
  #13  
Senior Member
 
hamhead's Avatar
 
Join Date: May 2006
Posts: 4,722
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: 2001 Hyundai Tiburon
Default

Follow the advice of people here and you should get it. Its not too hard... now imagine me pulling the ECU ou of my parts car when the driver's side door doesn't open so I have to do some wierd positions on the driver's seat to get under the dash. Now thats fun. wink1.gif
Old 04-09-2007, 10:36 AM
  #14  
Senior Member
 
REDZMAN's Avatar
 
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Default

Just remember, remove the screw that you don't need to, and HYPER extend that damed harness, you almost need it past perpendicular with the ECU to get the fangs out of the slot.




All times are GMT -6. The time now is 02:17 PM.