AirRam IM
#1
Senior Member
Thread Starter
Join Date: May 2004
Location: Bel Air, MD
Posts: 2,214
Likes: 0
Received 0 Likes
on
0 Posts
Re: Switch
I received this a few days ago. Unforunatly it had a few nicks in it from the way the package was "handled" or lack there of I guess. Redz sugested to do a light sand and then a buff job. Well I just 60 grit and then 400. I then covered the area with a light coat of mothers and then used an electric dremel with the duffer attached to buff the shit out of it. Needless to saw it looks alot better. I wouldn't say "good" but it is decent enough that if you didn't know what you were looking at you wouldn;t notice it too much. Just wanted to say thanks for the input Redz!!!!! It helped a ton!
#3
Senior Member
Thread Starter
Join Date: May 2004
Location: Bel Air, MD
Posts: 2,214
Likes: 0
Received 0 Likes
on
0 Posts
Re: Strobe Lights
I am installing the IM, BBTB, and CAM on Friday Evening / Saturday morning. As soon as its all in I will take some pics. And yeah we should meet up we are damn close!
#6
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: AirRam IM
Mothers?
As in a wheel polish or what?
You should get up to like 800 Grit, then put on some metal cream. Polish it by hand then when the cream is about dissapeared, use the buffer.
Glad it's workin out.
Will you please take a bunch of pics and do a DIY? We all need to know what hoses go where now.
As in a wheel polish or what?
You should get up to like 800 Grit, then put on some metal cream. Polish it by hand then when the cream is about dissapeared, use the buffer.
Glad it's workin out.
Will you please take a bunch of pics and do a DIY? We all need to know what hoses go where now.
#7
Senior Member
Thread Starter
Join Date: May 2004
Location: Bel Air, MD
Posts: 2,214
Likes: 0
Received 0 Likes
on
0 Posts
Re: BUGS!!!
Mothers is a kinda expensive high concentrate polish. It works very nice you just have to give it alot of elbow grease. Yeah I will take a crap load of pics and write up a DIY on the IM.
#8
Re: AirRam IM
sounds great man, and DIY would be awesome!
did you guys know about meet that I've organized on EXD? We have 20 ppl so far, and any rd guys would be welcome to come and hang out with us!
did you guys know about meet that I've organized on EXD? We have 20 ppl so far, and any rd guys would be welcome to come and hang out with us!
#9
Senior Member
Thread Starter
Join Date: May 2004
Location: Bel Air, MD
Posts: 2,214
Likes: 0
Received 0 Likes
on
0 Posts
Re: AirRam IM
When and where dude! Drop me a PM with the info when you getta chance.
This is probably a dumb question but here it is. On the IM is the best way to find out which hose goes were is simply by its size?
This is probably a dumb question but here it is. On the IM is the best way to find out which hose goes were is simply by its size?
#10
Re: ALL OLD MODERATORS, CHECK IN!
would i b able to remove my manifold while my car is on jackstands?? do you think i would have the leverage, or do i need to get a lift??