Group Buy Requests
#21
KVR, they are located in Ottawa Canada, they make replacement crossdrilled rotors for our cars.
i was quoted a price of 137$ cdn dollars for each front, and 160$ for the rears, pads are 62$. I hear that the quality is very good.
http://www.kvrperformance.com/world/world.html
i was quoted a price of 137$ cdn dollars for each front, and 160$ for the rears, pads are 62$. I hear that the quality is very good.
http://www.kvrperformance.com/world/world.html
#22
www.hyundaiperformance.com also offers KVR rotors for the front and rear. Front US $87.30 each and rear US $95.40 each, for a total of $365.4 without shipping. It's cheaper than what you got quoted but still out of my price range.
Oh well, I'll keep on looking.
Anton
Oh well, I'll keep on looking.
Anton
#23
Administrator
Join Date: Oct 2002
Location: ɯooɹpǝq ɹnoʎ
Posts: 13,943
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: ǝdnoɔ sısǝuǝƃ
I forgot HP carried rotors... I'll try and get with Rob and see if a group buy is possible. Maybe we can get them cheaper through his distributor.
#26
I have received responses from the two companies I previously mentioned on the drilled/slotted rotors topic.
Rotoworks are not offering any group buys, their price is set at $155.
R1 Concepts e-mailed this:
We at R1 Concepts just want to thank you for your interst in our product. We hope that we have answered all of your questions.
1. These rotors are designed by R1 Concepts
2. Yes, these rotor have been tested to fit. (OEM size)
3. Yes, we do carry cross-drilled rotors for 2000-2001 models
4. If you get stainless steel brake lines, Axxis Brake Pads, and cross-drilled slotted rotors you should be able to take you approximately 13-16ft of your 60mph-0mph to stop.
5. The shipping cost depends on the wieght/location of the package. Unforntunately, I can not give you the exact cost of shipping without that information.
6. Group Buy: 10-15 complete sets; 5% off and 20 complete sets; 6% off
Best Regards,
Tom Nguyen
General Manager
R1 Concepts
Best Regards,
Dan Nguyen
General Manager
R1 Concepts
-------
This is what I have so far, I still don't know about the quality of their products.
Does anybody has anything else?
Anton
Rotoworks are not offering any group buys, their price is set at $155.
R1 Concepts e-mailed this:
We at R1 Concepts just want to thank you for your interst in our product. We hope that we have answered all of your questions.
1. These rotors are designed by R1 Concepts
2. Yes, these rotor have been tested to fit. (OEM size)
3. Yes, we do carry cross-drilled rotors for 2000-2001 models
4. If you get stainless steel brake lines, Axxis Brake Pads, and cross-drilled slotted rotors you should be able to take you approximately 13-16ft of your 60mph-0mph to stop.
5. The shipping cost depends on the wieght/location of the package. Unforntunately, I can not give you the exact cost of shipping without that information.
6. Group Buy: 10-15 complete sets; 5% off and 20 complete sets; 6% off
Best Regards,
Tom Nguyen
General Manager
R1 Concepts
Best Regards,
Dan Nguyen
General Manager
R1 Concepts
-------
This is what I have so far, I still don't know about the quality of their products.
Does anybody has anything else?
Anton
#27
Administrator
Join Date: Oct 2002
Location: ɯooɹpǝq ɹnoʎ
Posts: 13,943
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: ǝdnoɔ sısǝuǝƃ
5% off? That's only $5 off on every $100... not really worth a group buy in my opinion but maybe in the future I'll consider it
now that I think of it... what is the 5% off of? What is their price?
I will e-mail the HyundaiPerformance store soon and ask them about a group buy... is there any difference between ordering front rotors vs. the back rotors? Isn't there another car that can use the same rotors? (Elantra or Accent?) and will the rotors be the same for 1st gens as it would 2nd?
now that I think of it... what is the 5% off of? What is their price?
I will e-mail the HyundaiPerformance store soon and ask them about a group buy... is there any difference between ordering front rotors vs. the back rotors? Isn't there another car that can use the same rotors? (Elantra or Accent?) and will the rotors be the same for 1st gens as it would 2nd?
#30
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Clovis, NM
Posts: 7,063
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2010 Jeep Wrangler Unlimited
I think Elantras use the same size rotors, and as far as I know both 1 and 2 gens are the same size. Some 1 gens were captive from the factory, but we don't need that now do we? wink1.gif