www.kspec.com is open~ please visit
11-30-2002 | 07:56 PM
#14
Thread Starter
Member
Joined: Nov 2002
Posts: 31
Likes: 0
hello...
no mean to threat hehe
anyways, that is funny we don't even have 1.6 in domestic models...
some exported model have 1.6L in accents and tiburon...i do not know
i would apreciate if you let me know about the engine~ THX~
no mean to threat hehe
anyways, that is funny we don't even have 1.6 in domestic models...
some exported model have 1.6L in accents and tiburon...i do not know
i would apreciate if you let me know about the engine~ THX~
12-01-2002 | 11:20 AM
#15
Senior Member
Joined: May 2001
Posts: 466
Likes: 0
QUOTE
daviDrift:
anyways, that is funny we don't even have 1.6 in domestic models...
some exported model have 1.6L in accents and tiburon...i do not know
i would apreciate if you let me know about the engine~ THX~
waht exactly woudl you like to know?anyways, that is funny we don't even have 1.6 in domestic models...
some exported model have 1.6L in accents and tiburon...i do not know
i would apreciate if you let me know about the engine~ THX~
here are few basic spects of taht engie
16-valve DOHC
Displacement :1.6-liter
Fuel Delivery System :Electronic Multi-port Injection (MPI)
Bore and Stroke :76.5 x 87.0 mm
Compression Ratio :10.0:1
Horsepower :103 HP @ 5800 RPM
Torque :106 Lb-Ft @ 3000 RPM
EPA Milage Estimate:28/36(City/Hwy)
let me know waht else you need and ill let find out for you.
PS: by the way i was the one asking about accent beta swap kit on kspec(Alex)
12-01-2002 | 12:05 PM
#16
Senior Member
Joined: Jul 2001
Posts: 4,828
Likes: 0
From: Winnipeg
QUOTE
daviDrift:
Hi guys,
I'm sorry to be so mean, but for all these questions, you can use our kSPec site's Q&A board. We cannot go around all the forums to answer questions. Any parts can be requested and found.
To quickly answer most of your questions,
Yes, Avante (Korean) = Elantra (US, UK)
Flywheel, yes they aer OEM modified, but we can also get aftermarket flywheels.
Yes, 1.8 pistons are for Higher compression.
Engines, they can be found and bought from Hyundai. But we are very very scared to ask the shipping price. eek! (possibly more than engine cost?) Many people just recommend ebay.
Wheeeeeew~ Did I miss any questions? You don't have to buy anything from our site. Use Q&A board and help each other. Teach us what we do not know about.
Enjoy driving and drive safely.
Yes, MINEHi guys,
I'm sorry to be so mean, but for all these questions, you can use our kSPec site's Q&A board. We cannot go around all the forums to answer questions. Any parts can be requested and found.
To quickly answer most of your questions,
Yes, Avante (Korean) = Elantra (US, UK)
Flywheel, yes they aer OEM modified, but we can also get aftermarket flywheels.
Yes, 1.8 pistons are for Higher compression.
Engines, they can be found and bought from Hyundai. But we are very very scared to ask the shipping price. eek! (possibly more than engine cost?) Many people just recommend ebay.
Wheeeeeew~ Did I miss any questions? You don't have to buy anything from our site. Use Q&A board and help each other. Teach us what we do not know about.
Enjoy driving and drive safely.
DYNO CHARTS WHERE?
12-01-2002 | 12:48 PM
#17
Member
Joined: Jul 2001
Posts: 45
Likes: 0
From: Chandler, AZ
Vehicle: 1999 Elantra
QUOTE
daviDrift:
hello...
no mean to threat hehe
anyways, that is funny we don't even have 1.6 in domestic models...
some exported model have 1.6L in accents and tiburon...i do not know
i would apreciate if you let me know about the engine~ THX~
I have the 1.6 Beta engine. It has a smaller bore than the 1.8 but is has the same stroke as the 1.8. It has around 116 ps at 6000 rpm and has around 14 kgm at 3000 rpm. That's all about my engine that I remember right now.
hello...
no mean to threat hehe
anyways, that is funny we don't even have 1.6 in domestic models...
some exported model have 1.6L in accents and tiburon...i do not know
i would apreciate if you let me know about the engine~ THX~
12-01-2002 | 11:25 PM
#18
Senior Member
Joined: Jul 2001
Posts: 691
Likes: 0
From: parkville, md
Vehicle: 1997 accent L
Ok, there are two 1.6L DOHC engines that Hyundai sells. One is the 1.6L beta engine thats found mainly in Singapore and other areas in Asia and Europe. Lantraluvr is the one to ask about that one...
The other is the 1.6L Alpha motor thats so far only being used in North America (in the accent) and in Europe (in the 03+ tiburon as the base engine). Its the 3rd generation alpha motor, and is nearly identical to the 1.5L DOHC sold everywhere else in the LC accent. I'm not sure how Hyundai went about getting the extra .1L of displacement, but I'm gonna bet it was on the bore of the engine (just like they did with the beta).
The other is the 1.6L Alpha motor thats so far only being used in North America (in the accent) and in Europe (in the 03+ tiburon as the base engine). Its the 3rd generation alpha motor, and is nearly identical to the 1.5L DOHC sold everywhere else in the LC accent. I'm not sure how Hyundai went about getting the extra .1L of displacement, but I'm gonna bet it was on the bore of the engine (just like they did with the beta).
12-02-2002 | 01:58 AM
#19
Super Moderator
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
Moving to OFF TOPIC where it belongs
daviDrift
You've already posted about this once. Unless you have "news"...or a product annoucement, please don't keep posting the same thing.
Please also post ONCE. In the PROPER FORUM.
daviDrift
You've already posted about this once. Unless you have "news"...or a product annoucement, please don't keep posting the same thing.
Please also post ONCE. In the PROPER FORUM.