General Performance & Hyundai Chat If you can't figure out which performance/modifications catagory to put your post in, then put it here. Also use this are to discuss general things about your Hyundai.
View Poll Results: Do you brake through a turn?
yes
35.29%
no
64.71%
Voters: 17. You may not vote on this poll

Do you brake through a turn?

Thread Tools
 
Old 11-15-2010 | 09:35 AM
  #1  
sunlord's Avatar
Thread Starter
Member
 
Joined: Oct 2002
Posts: 66
Likes: 0
From: Nashville
Vehicle: 2006 Elantra
Default Do you brake through a turn?

Just curious how you all take turns. Do you get your braking done before the turn or do you hold the brake through the turn?



I personally brake before the turn. I was taught to finish all my braking in a straight line and not ride the brakes through a turn because it is bad for the brakes if you do so.
Old 11-15-2010 | 09:41 AM
  #2  
bdiggy's Avatar
Moderator
 
Joined: Dec 2007
Posts: 2,448
Likes: 0
From: Thomaston, CT
Vehicle: 2012 Veloster DCT w/ Tech
Default

I do if I feel it's necessary. Brake pads are cheaper then a new car, or life for that matter!
Old 11-15-2010 | 11:17 AM
  #3  
majik's Avatar
Administrator
 
Joined: Oct 2002
Posts: 13,943
Likes: 0
From: ɯooɹpǝq ɹnoʎ
Vehicle: ǝdnoɔ sısǝuǝƃ
Default

In normal driving, I brake before entering the turn and accelerate out of the turn.



If I'm feelin' frisky, I brake even more so I can accelerate throughout the turn and swing that ass around
Old 11-15-2010 | 11:19 AM
  #4  
ACCENT2.0t's Avatar
Senior Member
 
Joined: Dec 2009
Posts: 116
Likes: 0
From: Hanover, PA
Vehicle: 1997 hyundai accent swap 2.0 turbo
Default

brake before and accelerate through it,
Old 11-15-2010 | 04:02 PM
  #5  
HyundaiKitCoupe's Avatar
Senior Member
 
Joined: Aug 2009
Posts: 11,992
Likes: 0
From: Washington D.C.
Vehicle: Hyundai Tiburon FX
Default

^same here, but I hold my foot on the brakes. Usually accelerate on turns.



It depends on the turn. Most often I accelerate because I don't need to slow down because of sway bars.
Old 11-15-2010 | 04:05 PM
  #6  
Tibbi's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 4,185
Likes: 0
From: Atlanta, GA
Vehicle: MC + RD2 + AW11 + 944 = 4x Win
Default

Braking through a turn is bad news, especially in an FF.
Old 11-15-2010 | 08:03 PM
  #7  
Stocker's Avatar
Super Moderator
 
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
Default

Brake into, not through. Accelerate out of. IF it is safe. Otherwise brake before turning. I know the roads I drive every day for the last four years like the back of my hand, and I know how this set of tires behaves now that it's almost worn-out. On my commute, I apex my turns and brake as deep into them as is required to maintain max. speed. It's my own personal below-the-speed-limit race course, and I'm the only participant. Within the bounds of safe/courteous driving, traffic and weather conditions, and the law, I have as much fun as reasonably possible on the way to work and back, daily. :biggrin:
Old 11-16-2010 | 08:26 PM
  #8  
187sks's Avatar
Administrator
 
Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6
Default

I brake in the turn when appropriate. Brake before the turn when appropriate depending on what I'm trying to get done.
Old 11-17-2010 | 04:36 AM
  #9  
MechaniX_034's Avatar
Senior Member
 
Joined: Mar 2006
Posts: 2,163
Likes: 0
From: Australia
Vehicle: Lancer Evo IX
Default

Depends on the road situation and if there's traffic after the turn, stoplights after the turn etc. If I'm not sure, I just default to using both feet at the same time. For circuit work, hell no. BUT, you can begin the turn on the brake(note however that this causes your tyrs to develop backward-facing shark-teeth at the outer shoulder. NOT good for road tyres!)
Old 11-17-2010 | 08:38 AM
  #10  
Turboron_99's Avatar
Senior Member
 
Joined: Feb 2010
Posts: 1,468
Likes: 0
From: Kent, Wa
Vehicle: 13 Gen Coupe Ult.
Default

Stocker Said it all... Found my new BFF!!!!!!



All times are GMT -6. The time now is 04:18 AM.