Valve Cover Gasket Leaking?
#1
Senior Member
Thread Starter
Join Date: Mar 2006
Posts: 5,754
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Tiburon
What do you guys think? Since it's pretty cold here, I won't get a chance to replace it until maybe another month. I won't run into bigger problems right if I dont replace the gasket soon?
#3
Senior Member
Join Date: Mar 2006
Location: Oakville, Ontario, Canada
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2006 Hyundai Sonata GL V6
That's not the head gasket, that's the head cover gasket. You'll just be leaking a little oil until you repair it.
#4
Senior Member
Join Date: Sep 2009
Posts: 4,185
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Elantra HD / 2007
do not worry about it! it's not head gasket! it's valve cover gasket.
You can change it later, just watch that it do not get worse and check you oil level.
I changed the title
You can change it later, just watch that it do not get worse and check you oil level.
I changed the title
#6
Senior Member
Join Date: Oct 2004
Location: Richmond, VA
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Could adding too much oil cause a leak at the valve cover gasket? Some fool topped my oil off to way over the full mark last time my car was serviced for something completely unrelated, and mine has leaked some too. So maybe if I remove the cover and clean everything well there won't be any more leaking, now that I am at the proper level.
It's a good thing I wasn't running synthetic, but they did add a different brand 10w30 to my 5w30.
It's a good thing I wasn't running synthetic, but they did add a different brand 10w30 to my 5w30.
#7
Senior Member
Join Date: Sep 2006
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Hyundai Fx Coupe
Mine's been spitting oil out like that for close to a year now. I'll be changing the VC gasket most likely when I swap the intake cam when I get around to it.
#8
Senior Member
Join Date: Sep 2009
Posts: 4,185
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Elantra HD / 2007
different oils like 10w30 and 5w30 can be mixed, especially if they are from the same manufacture.
Valve cover gasket may leak if it's not torqued properly (too low or too high).
Valve cover gasket may leak if it's not torqued properly (too low or too high).