Stock IM measurement
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Lillington, NC & Maryville, TN when I can get there
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
Re: Recalibrate The Speedo
Just a quick question. Does anyone just happen to know off hand what size the stock im measurement is? the reason i'm asking is because i want a BBTB but am not sure if i need to change out my IM also. any info would be greatly appreciated by a *NEWBIE*. thanx
#2
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Stock IM measurement
Welcome to the site, actually, you don't need to change out your IM, just bore the opening more. The stock is at 54MM I belive.
Or you can get the airram IM.
wink.gif
Or you can get the airram IM.
wink.gif
#3
Senior Member
Join Date: Jul 2001
Location: Clovis, NM
Posts: 7,063
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2010 Jeep Wrangler Unlimited
Re: Stock IM measurement
You will have to get it matched if you want to see gains. I think the stock TB and IM are 54mm.
Doh' Posted at the same time as Redz.
Welcome to the site! I see you are from No Hope Pope.
Doh' Posted at the same time as Redz.
Welcome to the site! I see you are from No Hope Pope.
#6
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: North East Meet Aug 21/22 ??
Nope, 54. Most of the BBTB's are 58MM, the Rside is 59-61MM and the Turbo's are 70MM.
#8
Senior Member
Join Date: Sep 2006
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Hyundai Fx Coupe
Inbox and Outbox for Private Messages
Are Oz spec throttle bodies different to the US spec???
On this site they reckon they're 50mm stock... Their modified BBTBs are "bored out to 55mm"!
http://www.performancestylingcentre.com.au/
Are they just mistaken? Or, as the US spec stock TB is 54mm, would I see performance gains (albeit minimal) with just a straight swap of stock throttle bodies (Oz/US) ???
With all of you guys having BBTBs I should be able to pick one up pretty cheaply...
Any thoughts?
On this site they reckon they're 50mm stock... Their modified BBTBs are "bored out to 55mm"!
http://www.performancestylingcentre.com.au/
Are they just mistaken? Or, as the US spec stock TB is 54mm, would I see performance gains (albeit minimal) with just a straight swap of stock throttle bodies (Oz/US) ???
With all of you guys having BBTBs I should be able to pick one up pretty cheaply...
Any thoughts?
#9
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: Stock IM measurement
QUOTE (wattsup4800)
i thought rside was discontinu'in the 70mm
No, they just can't afford to do another run of 100 of them without some backing. Wanna lend them 1,000,000 won?
wink.gif
QUOTE (OzFxCoupe)
Are Oz spec throttle bodies different to the US spec???
On this site they reckon they're 50mm stock... Their modified BBTBs are "bored out to 55mm"!
http://www.performancestylingcentre.com.au/
Are they just mistaken? Or, as the US spec stock TB is 54mm, would I see performance gains (albeit minimal) with just a straight swap of stock throttle bodies (Oz/US) ???
With all of you guys having BBTBs I should be able to pick one up pretty cheaply...
Any thoughts?
On this site they reckon they're 50mm stock... Their modified BBTBs are "bored out to 55mm"!
http://www.performancestylingcentre.com.au/
Are they just mistaken? Or, as the US spec stock TB is 54mm, would I see performance gains (albeit minimal) with just a straight swap of stock throttle bodies (Oz/US) ???
With all of you guys having BBTBs I should be able to pick one up pretty cheaply...
Any thoughts?
It's possible I guess. Depends on the TB really, you sure you were reading for a 2.0? I can't see Hyundai making different ones.