OBX Fuel Rails available!!
05-23-2002 | 05:20 AM
#21
Member
Joined: Mar 2002
Posts: 79
Likes: 0
Aem doesnt make them for the tib, go and check that link and you will see that some are nitrous ready!
http://www.obxracingsports.com/performance...=19&subCat2ID=2
http://www.obxracingsports.com/performance...=19&subCat2ID=2
05-23-2002 | 07:48 AM
#26
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Okay, I know this has been gone over before, but how do we know what Beta Engine we got? Can I tell from the VIN?
05-23-2002 | 11:10 AM
#27
Guest
Posts: n/a
REDZMAN: You got the Beta I. if its a 2.0L before 2003 tibby and the 2001 elantra then its the BETA I. If its a 2001+ Elantra and a 2003+ 4 cyl tibby then its the Beta II.
JAWS and others: I don't know if the OBX rails will have the NO2 hole. As some of the OBX rails have them and some of them don't. If you look at the OBX site again the civic SI and some others have it while others don't. There is a little * next to the note about the hole. Look at the applications and it shows that some civic's and others have the hole. While the ones without the * does not.
CF008 Civic n/a *Si & Si-R Only n/a $149.00
CF006 Civic (all) n/a CX/DX/LX/EX/HX/SI* n/a $149.00
CF001 Civic (all) n/a CX/DX/LX/EX/HX/SI* n/a $149.00
These are the only ones so far that have the extra hole. frown
JAWS and others: I don't know if the OBX rails will have the NO2 hole. As some of the OBX rails have them and some of them don't. If you look at the OBX site again the civic SI and some others have it while others don't. There is a little * next to the note about the hole. Look at the applications and it shows that some civic's and others have the hole. While the ones without the * does not.
CF008 Civic n/a *Si & Si-R Only n/a $149.00
CF006 Civic (all) n/a CX/DX/LX/EX/HX/SI* n/a $149.00
CF001 Civic (all) n/a CX/DX/LX/EX/HX/SI* n/a $149.00
These are the only ones so far that have the extra hole. frown
05-23-2002 | 11:49 AM
#28
Senior Member
Joined: Nov 2001
Posts: 394
Likes: 0
Fuel rails upgrades are usually not necessary. But CAN be beneficial in larger turbo or heavier nitrous applications. Depends on how good the stock fuel rail is.
It may add power... never tested one on a Tibby. Some of the bigger turbo guys use an upgraded fuel rail but most use the stock rails and 1000cc x 4 injectors.
It may add power... never tested one on a Tibby. Some of the bigger turbo guys use an upgraded fuel rail but most use the stock rails and 1000cc x 4 injectors.
05-23-2002 | 12:05 PM
#29
Senior Member
Joined: Mar 2002
Posts: 559
Likes: 0
OBX header Beta I engine: h95002
OBX header Beta II engine: h95004
headers are 4-2-1 ceramic and will be avail for $235.
fuel rails will be $140[/QB][/QUOTE]
It says on their website that the header for the tib will be $329,where did you get $235
OBX header Beta II engine: h95004
headers are 4-2-1 ceramic and will be avail for $235.
fuel rails will be $140[/QB][/QUOTE]
It says on their website that the header for the tib will be $329,where did you get $235
05-23-2002 | 03:48 PM
#30
Guest
Posts: n/a
QUOTE
plantenutz:
OBX header Beta I engine: h95002
OBX header Beta II engine: h95004
headers are 4-2-1 ceramic and will be avail for $235.
fuel rails will be $140
It says on their website that the header for the tib will be $329,where did you get $235 OBX header Beta I engine: h95002
OBX header Beta II engine: h95004
headers are 4-2-1 ceramic and will be avail for $235.
fuel rails will be $140
[/QB]Man you arent the first person to say that. The $235 is from that above link with the fuel rails. Not the OBX website. The price of $329 is MSRP.