Engine, Intake, Exhaust Modifications to your Normally Aspirated Hyundai engine. Cold Air Intakes, Spark Plugs/wires, Cat back Exhaust...etc.

Need Help Asap

Thread Tools
 
Old 08-02-2005, 04:44 AM
  #1  
Senior Member
Thread Starter
 
Dmitry's Avatar
 
Join Date: Sep 2009
Posts: 4,185
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: Elantra HD / 2007
Default

At first when I added gas rpm droped end then engine died, just stoped.

So now I spin starter and engine don't start.

I checked all fuses - nothing.

I checked timing belt, seems it's fine.

I thing it could be fuel pump.

What to do? need help.



How to check if it's fuel pump?
Old 08-02-2005, 05:31 AM
  #2  
Senior Member
 
javageek's Avatar
 
Join Date: Jul 2001
Location: Clovis, NM
Posts: 7,063
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: 2010 Jeep Wrangler Unlimited
Default

I believe you can hear the fuel pump if you turn the car to on and listen by the back seat.
Old 08-02-2005, 05:34 AM
  #3  
Senior Member
Thread Starter
 
Dmitry's Avatar
 
Join Date: Sep 2009
Posts: 4,185
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: Elantra HD / 2007
Default

I take out rear seat, and when I turn to on there is no sound.

How loud it should be?
Old 08-02-2005, 05:47 AM
  #4  
Moderator
 
JonGTR's Avatar
 
Join Date: May 2001
Location: San Antonio, TEXAS!!!
Posts: 7,164
Received 6 Likes on 5 Posts
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Default

Load enough to hear it. Take it out and test it.
Old 08-02-2005, 05:53 AM
  #5  
Senior Member
Thread Starter
 
Dmitry's Avatar
 
Join Date: Sep 2009
Posts: 4,185
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: Elantra HD / 2007
Default

Just tested, there is 12V in the connector but there is no sound from the pump.

How to test pump? pull it out and apply 12V? Does it metter on what terminal to put + and -?

How to take off cover?

how to get that pump out?

I don't see bolts.

there is only connector and 2 tubes.

How to get out that plastic cover?
Old 08-02-2005, 07:48 AM
  #6  
Moderator
 
JonGTR's Avatar
 
Join Date: May 2001
Location: San Antonio, TEXAS!!!
Posts: 7,164
Received 6 Likes on 5 Posts
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Default

The round black cover? Just pull it off. It's sealed on with black goo.

Here is Brendans DIY on a pump replacement: http://webhome.idirect.com/~trini/car/pump.html
Old 08-02-2005, 07:55 AM
  #7  
Senior Member
Thread Starter
 
Dmitry's Avatar
 
Join Date: Sep 2009
Posts: 4,185
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: Elantra HD / 2007
Default

crap

I have a cover - here is it:



and I cannot move it
Old 08-02-2005, 07:58 AM
  #8  
Moderator
 
JonGTR's Avatar
 
Join Date: May 2001
Location: San Antonio, TEXAS!!!
Posts: 7,164
Received 6 Likes on 5 Posts
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Default

There should be screws all around it that allow you to remove the pump assembly.

They're in this pic: http://webhome.idirect.com/~trini/car/pump6.jpg
Old 08-02-2005, 08:09 AM
  #9  
Senior Member
Thread Starter
 
Dmitry's Avatar
 
Join Date: Sep 2009
Posts: 4,185
Likes: 0
Received 0 Likes on 0 Posts
Vehicle: Elantra HD / 2007
Default

here is mine

http://www.chat.ru/~tiburon100/fp2.jpg

no screws 02.gif
Old 08-02-2005, 08:26 AM
  #10  
Moderator
 
JonGTR's Avatar
 
Join Date: May 2001
Location: San Antonio, TEXAS!!!
Posts: 7,164
Received 6 Likes on 5 Posts
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Default

Wow, totally different. It looks to me like that is some kind of clamp? Maybe you can pry it off?
I don't know. No one here has a setup like that and this is the first time I've heard of this. Your best bet is to get a service manual and read up.



All times are GMT -6. The time now is 01:18 PM.