MSD DIS2 programable help and advice?
#11
A wiring diagram, wire cutters, wire strippers. Also a lot of patience getting the damn ECU harness off. If you don't get the "technical manual" with your SMT-6, it has a lot of extra information that I can send you.
#12
I dont think the install will be that bad. the problem will be tuning, is the program hard to learn because I dont think there is anyone around my city that is any good at using and tunning the piggy back units. ill be looking most guys I know had to go out of province to find someone with the compatence and confadence to tune there cars.
#13
Well, that give you 2 options. Buy a wide band and learn to tune yourself. Might be a job/career opportunity for ya here, you could be the first person in your area who tunes piggyback's and aftermarket ECU's....
Or got ouside your city like everyone else does. The SMT-6 won't hurt anything while installed, but not tuned. You'll only hurt things if you try to change the settings without tuning it.
Or got ouside your city like everyone else does. The SMT-6 won't hurt anything while installed, but not tuned. You'll only hurt things if you try to change the settings without tuning it.