intake manifold from another car?
11-14-2006 | 08:53 AM
#1
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 24
Likes: 0
Vehicle: hyundai accent 1996
i know it's an old topic, but anyway - does any intake manifold from another car fit the beta 1 engine? the reason I'm asking - i'm putting on a supercharger, and need a bigger manifold, aswell as bigger TB. i heard somewhere that Prelude's intake manifold would fit? pleazz some info!
Igor
Igor
11-14-2006 | 03:51 PM
#2
Senior Member
Joined: Feb 2006
Posts: 414
Likes: 0
From: Illinois
A preludes will fit huh? I can see 1 difference right off... The throttle body is on the wrong side!!!! if your using a roots style, your not going to be using any part of your stock manifold, and for a centrifical... your not going to NEED to get them... Just pray for an airram man. 500 bucks all over.
11-14-2006 | 07:18 PM
#5
Senior Member
Joined: May 2006
Posts: 4,722
Likes: 0
Vehicle: 2001 Hyundai Tiburon
This topic is old... that post by Redz was June 16. He was still running the RSide then, he didn't install the 65mm until recently I think once he got the Air-Ram and headers back from ceramic coating.
I was first to install the 65mm on a N/A car I believe back around May, I think we bought around the same time but I put mine on right away. lmao.gif I can't stand having parts uninstalled.
I was first to install the 65mm on a N/A car I believe back around May, I think we bought around the same time but I put mine on right away. lmao.gif I can't stand having parts uninstalled.
11-14-2006 | 08:32 PM
#7
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
If only folks would read the reports in the Moderator Report center.
If only the folks posting would read the dates and see they are over a year old.
If only the folks posting would read the dates and see they are over a year old.
11-16-2006 | 07:04 PM
#8
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 24
Likes: 0
Vehicle: hyundai accent 1996
QUOTE (REDZMAN @ Nov 15 2006, 04:32 AM)
If only folks would read the reports in the Moderator Report center.
If only the folks posting would read the dates and see they are over a year old.
If only the folks posting would read the dates and see they are over a year old.
QUOTE
i know it's an old topic, but anyway
okay?!
and besides that, I'm using a roots SC, with the IC, so I'm keeping the stock I - manifold. I only seek for a bigger one, as the beta1 one is very restrictive. and also with bigger intake manifold there is easir to put on a larger TB.(e.g. if i COULD put on a prelude's IM, i could use a prelude's TB, right? i don't mind it's right sided!!)
so?
does anybody know sometnhing about compatibility?
greetz, Kennman
11-16-2006 | 09:42 PM
#9
Senior Member
Joined: May 2006
Posts: 4,722
Likes: 0
Vehicle: 2001 Hyundai Tiburon
Nothing like a Prelude or anything is compatible. The stock manifold doesn't flow that bad.
Either make your own or wait around for an Air-Ram to pop up. Or just port and polish the stock IM.
Either make your own or wait around for an Air-Ram to pop up. Or just port and polish the stock IM.
