Clutch Or Tranny?
#11
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 248
Likes: 0
From: Tacoma, WA
Vehicle: 2011 Sonata 2.0T Limited
most definately man. i was not happy at all when i saw that. just curious, is the beta 2 tranny as good as i've read on here? i'm just wondering before i get it all finished up and driving at the end of the week.
#14
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 248
Likes: 0
From: Tacoma, WA
Vehicle: 2011 Sonata 2.0T Limited
how'd he break the disc? my clutch didn't look too bad. there was some fraying around the edges of the disc and the bearing was stuck in the pressure plate so i went ahead and put the new clutch kit in.
has anyone ever had any problems with a bolt not going back in right? the middle bolt on the bottom of the bell housing won't thread at all. i worked on it for about 15 minutes and it just won't thread right. i made sure that the bolts on either side of it were good and tight, but will it still leak?
has anyone ever had any problems with a bolt not going back in right? the middle bolt on the bottom of the bell housing won't thread at all. i worked on it for about 15 minutes and it just won't thread right. i made sure that the bolts on either side of it were good and tight, but will it still leak?
#15
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 248
Likes: 0
From: Tacoma, WA
Vehicle: 2011 Sonata 2.0T Limited
i finally got the beta 2 transmission swap finished. i also put a new stock clutch in while i was at it. the beta 2 is sooo much smoother than the beta 1. i can't really tell about the gears yet. 1st is a little longer as i do remember what my top speed in that gear was. i haven't taken it out on the highway yet.